LS motor to manual trans

[Chuck]

Any body have the plans to mating a 6.0 or 5.3 to sm465. What fly wheel and clutch is needed. Anything I else might need to know. I found a 5.3 for 300 so I think am gonna buy it


Sent from my iPhone using Tapatalk

 

[Joshua8336]

Any body have the plans to mating a 6.0 or 5.3 to sm465. What fly wheel and clutch is needed. Anything I else might need to know. I found a 5.3 for 300 so I think am gonna buy it


Sent from my iPhone using Tapatalk

not sure what an sm465 is, but I know someone who mated a 5.3 to a 4 speed. as far as I know he used an old school clutch kit but didn't install the pilot bushing in all the way. i'll check with him and see about it

EDIT: I stand corrected. he used sach's clutch kit from O'Reilly's. (ten spline)and a pilot busing from an ls2/ls7.
clutch kit P/N K5552-03
flywheel P/N NFW1050 (also by sach's)
pilot bushing P/N 57080.
grade 8 metric bolts, because the standard ones are too big for the pressure plate.

 

[Chuck]

Ok thanks


Sent from my iPhone using Tapatalk

 

[Joshua8336]

Ok thanks


Sent from my iPhone using Tapatalk

enjoy the ls power!