Help with lift.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
Assuming the front springs i got are 4". To avoid using blocks in the back, how much height would a shackle flip give me? Also ill get a picture of the spring packs, and mabey someone on here can chime in. The stickers on them are to worn to see a #.
 

smurph20

Full Access Member
Joined
Jul 13, 2011
Posts
2,063
Reaction score
23
Location
Clyde, Arkansas 72717
First Name
Brad
Truck Year
1986
Truck Model
K20
Engine Size
350/SM465/NP208/4.10's
Shackle flip is worth 4 inches. If you use longer shackles you can gain 1 inch for every 2 inches of length. So if you buy shackls that are 4 inches longer when you do the shackle flip you only gain 2 more inches.
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
so if my springs end up being 2" springs, then i need 4" longer shackles for the front? then itle be 4"?
 

smurph20

Full Access Member
Joined
Jul 13, 2011
Posts
2,063
Reaction score
23
Location
Clyde, Arkansas 72717
First Name
Brad
Truck Year
1986
Truck Model
K20
Engine Size
350/SM465/NP208/4.10's
yes but you gotta be careful of going to long because they will compress the wrong way when you flex the spring.
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,528
Reaction score
5,817
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
Also longer shackles in the front hurt your driveshaft and pinion angles.
 

1986K30

Member
Joined
Oct 3, 2012
Posts
32
Reaction score
0
Location
Colorado
First Name
Sam
Truck Year
1986
Truck Model
K30
Engine Size
7.4L
Whats your goal for the truck? If you have 2" up front, ORD makes a 2.5" shackle flip. You could go that route and maybe an ez inch block or ORD zero rate add-a-leaf block to level it out. Personally I like the low lift option to the suspension working like it should. Hope that helps!
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,076
Reaction score
3,051
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
Keep in mind that if you buy 4" lift springs for the front it MIGHT lift the truck more than that. Depends on how much your old springs settled.
I bought 2" springs for the front of mine and they lifted the front 3.5".

So if you get 4" springs for the front you might end up needing to do a shackle lift plus maybe the zero rate block for the rear to be level... or else it might look like the rear end is squatting.
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
Im wanting to do a 4" lift minimum if i lift it, but i also dont want to high like an 8", cause its just impractical on the street.

But i bought most of a kit from a freind for 50$, and it has the stickers still on it, but they are weathered to much. And this kit is practiacally brand new. The only thing is, I dont know how tall they really are.
 

crazy4offroad

Equal Opportunity Destroyer
Joined
Jul 30, 2010
Posts
8,468
Reaction score
1,070
Location
West BY-GOD Virginia
First Name
Curt
Truck Year
1979
Truck Model
K-10
Engine Size
350/SM465/NP205
Post a pic, I'm sure one of us could guess.. ;)
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
Well after forgeting again today, i got up tonight and went out and took pictures.
You must be registered for see images attach

You must be registered for see images attach
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
29,125
Reaction score
24,022
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Hmm, could be 4 or 6. I'm leaning more towards 4, but it's hard to say without weight on them.
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
Hmm, could be 4 or 6. I'm leaning more towards 4, but it's hard to say without weight on them.

SWEET, i was affraid someone would say 2........

I dont want a sissy lift.
 

Latest posts

Forum statistics

Threads
42,158
Posts
910,326
Members
33,655
Latest member
djisurfli
Top