delete or not??? emissions

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kgc4160

Member
Joined
Aug 20, 2017
Posts
34
Reaction score
6
Location
wahington
First Name
kelly
Truck Year
1981
Truck Model
c10
Engine Size
305
hey guys was just wondering whos deleted the emissions..81 305 with electronic spark control.. have bypassed the esc.. module went out.. but was wondering about the cat converter and emissions hoses.. ect ect
 

Obwonkonobe

Full Access Member
Joined
Feb 21, 2017
Posts
531
Reaction score
116
Location
AZ
First Name
Ethan
Truck Year
78
Truck Model
C10 custom deluxe
Engine Size
350
If you aren’t exempt I’d keep it, otherwise keep it simple
 

smoothandlow84

I'd rather be draggin' frame
Joined
Jan 4, 2015
Posts
2,121
Reaction score
784
Location
Arizona
First Name
Steve
Truck Year
1984 Frame...87 motor and 700r trans
Truck Model
1500 r10 pavement scraper
Engine Size
350 TBI
X2..if exempt from smog testing...gut that like a fish. Ditch the converter, smog pump, plug the exhaust manifold air tubes and then proceed to clean up the engine bay of all the spaghetti vac lines.
 

436'd skylark

Member
Joined
Nov 22, 2015
Posts
45
Reaction score
34
Location
VT
First Name
Joe
Truck Year
2005
Truck Model
2500HD
Engine Size
Durajunk
You'll gain next to nothing yanking that crap out. The anemic 120 horse 305 will go to 123 horse. You have much bigger fish to fry.
 

smoothandlow84

I'd rather be draggin' frame
Joined
Jan 4, 2015
Posts
2,121
Reaction score
784
Location
Arizona
First Name
Steve
Truck Year
1984 Frame...87 motor and 700r trans
Truck Model
1500 r10 pavement scraper
Engine Size
350 TBI
You'll gain next to nothing yanking that crap out. The anemic 120 horse 305 will go to 123 horse. You have much bigger fish to fry.



He wont necessarily gain huge h.p. gains, but it is still worthless equipment that just gets in the way regardless.
 

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,387
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
I’d get rid of everything except the charcoal canister and PCV. If it was TBI, I’d say keep the EGR valve, too, but no computer, no codes, no problem. It won’t be too bad, but if the air injection is still there, that’s gonna be a fun one (not) and the EFE valve presents a few options in its deletion (manifold spacer, gut the thing, tie the valve open). You’ll also need an EGR block off plate for the manifold.
 

kgc4160

Member
Joined
Aug 20, 2017
Posts
34
Reaction score
6
Location
wahington
First Name
kelly
Truck Year
1981
Truck Model
c10
Engine Size
305
not tbi and no smog testing.. alot of vacuum lines..no air injection pump.. no egr.. so far its completely stock.. thanks for the input
 

1987 GMC Jimmy

Automobile Hoarder
Joined
Jan 23, 2016
Posts
5,848
Reaction score
2,387
Location
Mississippi
First Name
Jesse
Truck Year
1987
Truck Model
V1500 Jimmy
Engine Size
350
Sounds like it won’t be too bad then!
 

436'd skylark

Member
Joined
Nov 22, 2015
Posts
45
Reaction score
34
Location
VT
First Name
Joe
Truck Year
2005
Truck Model
2500HD
Engine Size
Durajunk
You'll likely eliminate some vacuum leaks. Is it a standard q-jet or is it a compu carb? The compu carb will have wires going to it. 2 plugs
 

Paladin

"Teufelshunde"
Joined
Jan 1, 2018
Posts
1,726
Reaction score
6,060
Location
Wichita Falls, Texas
First Name
Mike
Truck Year
1985
Truck Model
C30 Silverado Crew Cab Dually
Engine Size
468
Delete everything you can. The only thing controlling the emissions on my 468 BBC is the long tube headers. Even if your not exempt there is always somewhere that will pass it for an extra 50 bucks. Take a walk on the Wild Side!
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,038
Reaction score
1,835
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
Whatever you do, do not delete the PCV system. It is there for the health of the engine, and lack of crankcase ventilation can cause all types of condensation problems if you remove it.

The charcoal canister is also needed if there is no other venting system on the gas tanks.

Bruce
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,192
Reaction score
16,055
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350
If you decide to gut it or remove anything, I'd take LOTS of pictures first. You never know.
 

highdesertrange

Full Access Member
Joined
Dec 19, 2013
Posts
1,066
Reaction score
211
Location
kalifornia
First Name
mike
Truck Year
1978
Truck Model
k30
Engine Size
454
OMG you guys are killing polar bears. just kidding yank it all off, your engine will thank you. going from 120 to 123hp is a 2.5% increase, it's a start. highdesertranger
 

Rusty Nail

Full Access Member
Joined
Jan 29, 2015
Posts
9,790
Reaction score
9,690
Location
the other side of the internet
First Name
Rusty
Truck Year
1977
Truck Model
C20
Engine Size
350sbc
But what about the polar bears mannnn?

My question to the OP is : "What do you think it will change?" Deleting equipment your truck was built to utilize is a joke , imo.

Might as well run 3 inch pipe and dumps after your stock engine and think you're going fast.

 

Forum statistics

Threads
42,168
Posts
910,561
Members
33,663
Latest member
eatfood
Top