cruise control linkage for a edelbrock carb

[ryan.johnson]

I've recently replaced the holley carb in my 84; due to leaks and poor running conditions, with an edelbrock 1406. My truck has a 700r4 transmission so I installed the geometry corrector from summit.

Now here's my question: when the p.o. installed the 350 and 700r4 he didn't reconnect the cruise control, the vacuum/servo module thing is still there but no linkage. How does/did this module connect to the carb?

I bought a 8036 mounting bracket thinking the cruise cable was supposed to run through a bracket similar to that. should I leave the stock bracket or will the 8036 bracket help with alignment and or the cruise control.

thanks for the help

 

[chengny]

Some images that might help - and a link to parts lists:

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

http://parts.nalleygmc.com/products.../BRACKET-Cruise-Control/2684989/14048069.html