Lifted_84_Chevy
Junior Member
- Joined
- Oct 22, 2013
- Posts
- 3
- Reaction score
- 0
- Location
- Maryland
- First Name
- Jeremy
- Truck Year
- 1984
- Truck Model
- K20
- Engine Size
- 350
So I am in the process of building my 350 4 bolt. The block will be going to the machine shop next week to be honed, decked, and hot tanked. I was going to talk to the guy at the machine shop on his input of what to do to the bottom end like what pistons, cam, etc. to run. I could use any input to run by him or think about before hand.
Build list
Aluminum Heads 200cc runner, 64cc chambers. 2.02 1.60 valve size
Edelbrock 650cfm carb... was thinking of going to a 750
Edelbrock rpm intake
Hedman long tubes
Any input would be greatly appreciated, this is my first motor rebuild for an older chevy motor. Thanks in advance!
Build list
Aluminum Heads 200cc runner, 64cc chambers. 2.02 1.60 valve size
Edelbrock 650cfm carb... was thinking of going to a 750
Edelbrock rpm intake
Hedman long tubes
Any input would be greatly appreciated, this is my first motor rebuild for an older chevy motor. Thanks in advance!