Anybody know this disconnected tube?

[parris]

Took a video zooming in to give context, but I guess can't upload videos. Anyway was looking to replace the accelerator pump in the carb then noticed this was disconnected.

Photos 1-3 sorta zoom into where it's located

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[xm20k]

Probably that vacuum port. Just a guess.

You must be registered for see images attach

If it was me, I'd buy a roll of vac line and replace all/most of it looks pretty dry rotted.

 

[parris]

I purchased a carb rebuild kit, but this sounds a lot easier. Would it be 8mm like all of the other lines?

 

[xm20k]

That I couldn't tell you find the other end pull it and take it with you to the parts store.

 

[Ricko1966]

Looks like that split hose goes on that vacuum tree 3 inches below it.

 

[parris]

That I couldn't tell you find the other end pull it and take it with you to the parts store.

Duh... thanks.

 

[chevdude]

Wires and hoses seem to have "memory" to them. If not disturbed too much, it should be pointing at where it came from. See above posts.

 

[Sad Sack]

Probably that vacuum port. Just a guess.

You must be registered for see images attach

If it was me, I'd buy a roll of vac line and replace all/most of it looks pretty dry rotted.

This one looks crusty too:

You must be registered for see images attach