Air Compressor recommendations within my requirements?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
9,558
Reaction score
17,536
Location
The Right side of Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Whatever brand you decide on, my advice is to buy from a local store that sells and repairs compressors. I bought my Puma from Green Valley Compressor in Keller, TX north of Ft. Worth. They are knowledgeable folks who sell industrial quality stuff. The guy I dealt with has been there something like 30 years and has seen it all.
Green Valley Compressor: https://www.greenvalleycompressor.com/home

Have to say when my V-twin Puma is running, it's more like chug-chug-chug than the noise the cheapie in-line compressors make.

Mine is an older version of the TE3040V. It's a real 3hp and runs on a 240 volt/20 amp circuit. New models have 3-cylinders. There is also a 60 (or 80?) gallon version.

Also, watch out for horsepower claims! If a so called "5 hp" compressor has a motor that says "air compressor motor" instead of 5 hp, it's not really a 5 hp motor. This was a problem for many years, but it may have been cleaned up by now.

Here's the motor tag on a 25 year old DeVilbiss "Charge Air" model. Volts/amps ratings are very close to my Puma's 3 hp motor, but DeVilbiss claims 6 hp! It must be magic!
You must be registered for see images attach


Here's my 3 hp 40 gal Puma. Overkill for my needs.
You must be registered for see images attach
Holy fawk!
That might be the cleanest nicest corner in a garage I’ve ever seen!
 

Forum statistics

Threads
48,661
Posts
1,074,097
Members
43,328
Latest member
anjones98
Top