Vman
Junior Member
- Joined
- Feb 20, 2016
- Posts
- 3
- Reaction score
- 0
- Location
- Rhode Island
- First Name
- Lee
- Truck Year
- 1984
- Truck Model
- k20
- Engine Size
- 454
'84 k20 nv4500 swap HELP
Hey what's up guys, brand new to the site so excuse me if this topic has been covered before.
I have an 84 k20 with a 454 700r4 np208 set up, I know the 454 is not original but I don't know what it came out of, it was in the truck when I bought it.
So I'm starting the process of trying to track down the parts I'm going to need to do the nv4500 swap. I've read a bit on this swap already but still unsure of what exactly I should be looking for/need.
What year nv4500 should I be looking for, 92-94 or 95-up ?
Am I going to need to buy an adapter for my t-case or will bolt up? Or any type of adapter for that matter. I know that I'll probably have to swap in a 32 spline input for my t-case (not 100% sure because I haven't taken it off to look yet)
The goal is to not have to buy an adapter because it seems as if those are a bit pricey.
As for the cross member, from what I've read, I should be able to use the same one correct?
I know there is a bunch of stuff I'll be asking about once this project gets rolling, I'm just trying to get the basics out of the way and figure out what I should be looking for just to get me started.
Thanks in advance guys I appreciate any info/tips you can give me!
Hey what's up guys, brand new to the site so excuse me if this topic has been covered before.
I have an 84 k20 with a 454 700r4 np208 set up, I know the 454 is not original but I don't know what it came out of, it was in the truck when I bought it.
So I'm starting the process of trying to track down the parts I'm going to need to do the nv4500 swap. I've read a bit on this swap already but still unsure of what exactly I should be looking for/need.
What year nv4500 should I be looking for, 92-94 or 95-up ?
Am I going to need to buy an adapter for my t-case or will bolt up? Or any type of adapter for that matter. I know that I'll probably have to swap in a 32 spline input for my t-case (not 100% sure because I haven't taken it off to look yet)
The goal is to not have to buy an adapter because it seems as if those are a bit pricey.
As for the cross member, from what I've read, I should be able to use the same one correct?
I know there is a bunch of stuff I'll be asking about once this project gets rolling, I'm just trying to get the basics out of the way and figure out what I should be looking for just to get me started.
Thanks in advance guys I appreciate any info/tips you can give me!
Last edited:
