nab407
Junior Member
- Joined
- Aug 12, 2015
- Posts
- 12
- Reaction score
- 0
- Location
- Orlando, FL
- First Name
- Nick
- Truck Year
- 1986
- Truck Model
- K30
- Engine Size
- 6.2L Diesel
I'm almost done with my wiring harness restoration (praise baby jesus), but I have a question about the pinout for the "old-style" cylindrical '83 glow plug controller. I have all the wiring for it worked out, except for one mystery wire that has been cut. On all of the diagrams I've looked at, the pin the I have a wire coming out of, the diagram shows nothing there. Please advise.
In the image below, you will notice that the #2 pin has no wire coming from it. However, mine has a tan wire coming out of it, but it has been cut.
*Note: the previous owner installed a momentary switch for manual glow plug override.
In the image below, you will notice that the #2 pin has no wire coming from it. However, mine has a tan wire coming out of it, but it has been cut.
*Note: the previous owner installed a momentary switch for manual glow plug override.
You must be registered for see images attach
