1987 Chevy r10 front end vibration at highway speed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

chengny

Full Access Member
Joined
Feb 22, 2012
Posts
4,086
Reaction score
1,010
Location
NH
First Name
Jerry
Truck Year
1986
Truck Model
K3500
Engine Size
350/5.7
BTW, did you do as MrMarty51 suggested:

Tr4y installing the rear tires on the front, see if it still shakes then.

That is a very useful diagnostic. If you have not done this yet, you should - before investigating anything else.
 

LB2387

Junior Member
Joined
Dec 13, 2014
Posts
22
Reaction score
1
Location
texas
First Name
matt
Truck Year
1987
Truck Model
r10
Engine Size
350
There doesnt really seem to be any way to control the shaking. It seems to start as soon as it hits the 65-75 mph range, and smooths out around 85. The majority of the vibration is in the steering wheel, but a little bit in the pedal as well. It feel like the steering wheel is shaking more up and down rather than side to side. And it shakes hard enough to have a pretty big vibration amplitude(if you know what I mean). Doesnt really build up. All body mounts, core support mounts, engine mounts, and tranny mount have all been replaced within the last year. Transmission was rebuilt less than a year ago. I checked the rag joint it was nice and tight, with no signs of wear. The bearing on the bottom of the steering shaft had a little bit of play in it, but not sure if its enough to cause the problem. Could be suspect though.
 

Latest posts

Forum statistics

Threads
42,332
Posts
913,854
Members
33,833
Latest member
nathanjohnson85
Top