Search results

  1. JM in KY

    Loose cab mount

    My front driver side cab mount is a little loose. There’s an occasional “pop” if I go over a bump at low speed just right. After some investigation, I found I can just barely turn the bottom section of that mount with my hands. I cannot move any of the others. The rubber pieces appear to be in...
  2. JM in KY

    Anybody got a fully functional cassette player?

    Looking for a working cassette tape deck for 1987 GMC Sierra Classic. Only want original / OEM set-up. Radio works great in mine, but it eats tapes.
  3. JM in KY

    Where do I buy new interior kit?

    Is there a reputable company that makes / sells all the interior components I would need to completely re-do my interior (1987 Sierra Classic)? I don’t want to wait forever for the parts to arrive and I’d like the parts to be at least decent quality. I rebuilt my neighbor’s interior in the...
  4. JM in KY

    Bench seat latch

    I’m helping a neighbor dress up his ‘76 C10. I have a question about the bench seat latch. My ‘87 does not have a latch, so this is new for me. The latch lever attached to the upper, mobile part of the seat appears to work well. However, on both sides, there is no bolt (pin?) in the lower part...
  5. JM in KY

    350 TBI needs starting fluid

    My ‘87 V1500 with a 350 needs a spray of starting fluid to get going after sitting overnight. It just started acting this way last week. Runs like a top once it’s started and injectors appear to spray a nice cone of fuel when the engine is revved. I don’t see any leaks along the fuel lines and...
  6. JM in KY

    Finally snagged a fuel injection emblem.

    Put this on tonight. It’s a tiny detail, but it’s bugged me that my ‘87 didn’t have the fuel injection emblem. Couldn’t stomach the prices I kept seeing for new ones, but finally got lucky and found a used one for $35 on EBay. Best part is it’s an original, and has just enough patina to look...
  7. JM in KY

    8-track player install

    Has anybody added an 8-track player to their square? I inherited a bunch of my grandfather’s old tapes and I’d like to use them in my square body (just like he did when I was a kid) Does the wiring usually have to be spliced in? Some kind of plug-and-play? Other things I should think about?
  8. JM in KY

    Seat belt sleeves

    Anyone have a source for the plastic sleeves that go around the front seat belts? I’m looking for original or reproduction that looks like original. I know there are aftermarket generic sleeves, but I don’t want that. My truck is an ‘87 GMC single cab with blue interior.
  9. JM in KY

    Power steering pump

    How common is bearing failure in a power steering pump? My ‘87 GMC 350 squeals / chirps after reaching operating temperature. Doesn’t happen exactly when the thermostat opens, but within a few minutes after. Also occasionally will start before getting that hot, maybe 150 to 160 degrees. Never...
  10. JM in KY

    Identify this engine component?

    What is the part I’ve pointed to with the orange arrow? This is not my engine, but mine has the same component (maybe they all do?) I can identify AC compressor, water pump, PS pump, and alternator, but I feel like I’m just having brain fog about this. Anyway, there’s some squealing on the...
  11. JM in KY

    Steering box shaft weird movement

    I replaced my steering box recently because the original made a popping noise when turning at very low speed. It correlated with a visible motion of the shaft attached to the pitman arm. The shaft moved in and out of the box about 1/4 inch and occasionally made a pop. Well, the “new” one does...
  12. JM in KY

    Fender emblem replacement

    Anybody have an easy way to replace the fender badges on a square? Specifically, I’ve got a 1987 GMC Sierra Classic. The “Sierra Classic 1500” badges on the front fenders are faded terribly. Looks like I’d have to take off the fender, but I don’t really have the time or energy for that. Looks...
  13. JM in KY

    Steering stabilizer removal

    What’s the best way to remove the steering stabilizer on a stock V1500? The end closest to the front wheel is stuck solid. I know the bolt that goes through the long tie rod is tapered, which is probably part of the problem. I’ve banged on it with a hammer and heated it some with a torch. What’s...
  14. JM in KY

    Trailer hitch recommendations

    I’d like to add a trailer hitch to my truck. 1987 GMC regular cab with 8 foot bed. Is there one that allows me to keep my spare tire under the truck and does not require drilling new holes into the frame? Not planning on doing any heavy duty work - pulling small trailer with Allis-Chalmers...
  15. JM in KY

    Bumper guards

    I’m looking for bumper guards for my ‘87 GMC. I know there are new ones for sale on various websites, but the prices are hard to swallow. Anybody got a good set that I won’t have to sell a kidney for?
  16. JM in KY

    Tailgate panel black outline

    My aluminum tailgate panel (‘87 GMC) is in very good shape, but the black outline around the perimeter of the panel is missing in a couple places (see photo). Is the black border painted on or is it black tape/decal? I’d like to just patch the small missing areas, but want to do it similarly...
  17. JM in KY

    Leaf springs for 87 V1500

    I’m looking at replacing the leaf springs (front and rear) for my ‘87 GMC. It has a 350 and is a half-ton single cab. Anybody know the original weight ratings and / or have a recommended source for these? I plan to do the work myself, so cost not a huge concern.
  18. JM in KY

    Fuel injection emblem?

    Does anyone have an extra “fuel injection” emblem for the tailgate of my 1987 GMC? I don’t mind paying a fair price and know that LMC has them for about $60. Just figured I’d try to find an OEM and stick to this community that’s been so helpful in my adventure.
  19. JM in KY

    Low oil pressure but engine runs great

    I had assumed my oil pressure gauge was just wrong, but maybe not… Recent purchase of 1987 GMC V1500 with 350 engine. Other than paint, nearly everything is original with 114,000 original miles. Engine has always run quietly for me. No valve train noise, etc. Oil pressure gauge usually...
  20. JM in KY

    Where do I get OEM battery cables?

    I’m having a terrible time trying to find “original” battery cables for my 1987 V1500 with the original 350 engine. I need the negative ground cable, but would love to find both. To be clear, I don’t want the generic ACDelco cables that I have to splice into the existing body ground (or the...
  21. JM in KY

    What is this hose under my truck bed?

    What is this? Or maybe what did it used to be? I was under my truck making sure the spare tire was inflated and I noticed this hose hanging down from the center of the bed. It’s capped at one end and looks to be cut off at the other. Not attached to anything, but held in place by a very...
  22. JM in KY

    Where do I fine starter cable and other wires?

    I need a new POSITIVE battery cable / solenoid cable for my 1987 GMC V1500. I’ve searched the internet and don’t come up with anything that looks like the original. Anybody know the AC Delco part number? Would also be ok with other brand if good quality. Apparently there are other ground or...
  23. JM in KY

    Anybody have a jack set for an ‘87 I could buy?

    I know this is the wrong place, but I’m impatient and trying to get my ‘87 GMC as complete as possible. For unknown reasons, I am missing the 2-piece crank for the jack, the lug wrench, and all the mounting brackets for them. The jack itself is in good working order and mounted correctly...
  24. JM in KY

    Dual tank fuel gauge makes no sense.

    Posted before with no replies. Someone take pity on me. My dual fuel tanks switch appropriately and both pumps work well. Switch in the cab and selector valve are new (replaced by me). However, fuel level reads only from left tank regardless of which tank is selected. How is this possible...
  25. JM in KY

    Dual tanks work, but maybe not switching the gauge?

    I’ve recently replaced the fuel selector valve on my 87 GMC R1500. Also replaced the switch inside the cab. I’m pretty sure the tanks switch, because I can hear a change in tone under the truck when I select the right tank (like the right pump makes a slightly different noise). However...

Latest posts

Forum statistics

Threads
42,207
Posts
911,360
Members
33,708
Latest member
btrain04
Top