Search results

  1. Carlton Huitt

    Oil pressure but no oil up top

    I’m priming the oil pump with a pump tool on a 73 350. I’m getting about 35 psi while turning it with an electric drill. After several minutes no oil in the valve train. It was working fine before I got my hands on it. Replaced valve seals and intake manifold. Took me a few weeks since I only...
  2. Carlton Huitt

    Bent

    Push rods. This was a 73 350. That was running good with bubblegum and spitwads holding it togoether. I was in the process of replacing valve umbrella covers. I found intake valve pushrod 2 and inyake 8 bent. Does that means death inside that bitch and I need to pull her? Or patch her up and...
  3. Carlton Huitt

    WTF? Intake manifold crud

    Were all pulling for you. Your success is our secession.
  4. Carlton Huitt

    WTF? Intake manifold crud

    Very cool! I appreciate you all. Thanks! I’m so afraid I’m going to start the engine and discover a leak.
  5. Carlton Huitt

    WTF? Intake manifold crud

    WBuff02 sorry. Just one more question. Do you mean put the Grey on the flat mating surface of the head? Or put the grey around the inside edge of the water port and use Red on the mating surface? Thanks for your time.
  6. Carlton Huitt

    WTF? Intake manifold crud

    Snoots. Don’t laugh but what is hot tank?
  7. Carlton Huitt

    WTF? Intake manifold crud

    Thank you!
  8. Carlton Huitt

    WTF? Intake manifold crud

  9. Carlton Huitt

    WTF? Intake manifold crud

    I removed my intake manifold and found the last two passages packed in rust. What does this mean?? Do I have to heap the engine? What can I do? This gets fun at some point right?
  10. Carlton Huitt

    73 Park Brake Switch

    Stolll haven’t gotten it wired.
  11. Carlton Huitt

    73 Park Brake Switch

    I’m not sure if it is the original cluster. I got the truck used multiple users. Thanks for the lead on the proportioning valve. I will start there and update the outcome here. Again I really do appreciate you taking the time to reply.
  12. Carlton Huitt

    73 Park Brake Switch

    My park brake light on the lower left of the instrument cluster is steady on. Does anyone know where the switch is so I can repair? Is it park brake warning or main brakes? Oh boy....:(
  13. Carlton Huitt

    Hanger bearing spacer

    Same here. No spacer. Actually the bearing wasn’t even pressed on it was just dangling there.
  14. Carlton Huitt

    Hanger bearing spacer

    I got a new hanger support bearing for the driveline on my 73 long bed C 10. It came with a spacer ring. Do I need to use it? If so does it go in front or behind the bearing on the shaft?
  15. Carlton Huitt

    Intake Manifold Bold length

    Thank you gentlemen for your helpful answers. I have the bolts should I install of the new bolts? If so would you suggest an approach to this so I can minimize risk of disrupting the intake to block seal? thanks for taking time from your life to help a stranger!
  16. Carlton Huitt

    Intake Manifold Bold length

    1973 C-10 350 engine, not original previous owners twice removed installed it. I am trying to address leaking oil around the intake manifold bolts at the 3 and 4 position on each side of the manifold. This was a botch job and it looks like they used whatever bolts they had in a coffee...
  17. Carlton Huitt

    New Guy

    Hello. I have a 73 Chevy C-10 fleetside. Just got it a couple of months ago. Running but rotten everything. Trying to get it up to safe beater condition.

Latest posts

Forum statistics

Threads
42,116
Posts
909,505
Members
33,611
Latest member
RNFL
Top