Search results

  1. kenn

    Replacement panels quality

    plus 1 on fixmyrust, heard they are better than most. I got mine from LMC and they sucked thin steel, fit was crap and to beat it all not cheap in price at all
  2. kenn

    Stepside fender braces

    Yes thank you :)
  3. kenn

    Stepside fender braces

    Anyone have a photo (or willing to take a photo) of the front upper and lower braces on your step side . I don't remember how my came off I have the brace labeled, I must have replaced the metal where the hole was low part of brace is in hole in lower Fender before wheel opening...
  4. kenn

    Stepside metal repair and paint

    78 k10 all rotted wood removed , all rust cut out, patch panels welded in , floor supports welded in, Painting single stage from summit, started under bed sides while upside down
  5. kenn

    Stripping Paint

    If you have big elbows it will go pretty fast LOL That's going to be a ton of work
  6. kenn

    Decent Paint That Won't Break the Bank

    Michigan here as well, have summit check for a low voc replacement Went thru same thing with them a month ago. I was able to replace the items they couldn't ship with either a low voc, or a different brand. Was able to order entire paint supplies from summit.
  7. kenn

    DIY paint??

    Doing the same here, and I decided to do it my self Figure it would be a good project, and I'm willing to live with my results Lots of youtube vids on this stuff I have spent 2000 so far on tools and supplies, so either way this is not a cheap project, but was quoted 8000 for a basic...
  8. kenn

    2in or 4in?

    I would second the tuff country springs over rough country (softer ride) I would have a few hundred bucks put up for replacements parts along the way I did 4 inch lift had to replace dry rot front brake lines 80$ had to replace drivers front hard line (flare nut rusted to flex line and...
  9. kenn

    stepside fuel filler hose and vent

    LMC repops have the higher hole location for filler will have to try and find a longer replacement hose
  10. kenn

    raptor liner

    anyone have raptor bedliner applied? I was thinking of spraying in bed, and rear fender wells with this on my step side. does it collet dirt? clean up well? is it tough? Thanks for any advise
  11. kenn

    Is there a lift on this ?

    Front axle tube to bump stop bracket measures 12 3/4 inches
  12. kenn

    Is there a lift on this ?

    Alcans look sweet, just wasn't in my budget this year. Maybe I will get them if I ever go to a 6 inch lift
  13. kenn

    Is there a lift on this ?

    Maybe someone removed leafs for a softer ride
  14. kenn

    Is there a lift on this ?

    4 inch tuff country springs looks like same arch
  15. kenn

    Is there a lift on this ?

    I would check anything rubber, my 78 was pretty crispy ended up changing ball joints , and steering drag link while doing the lift
  16. kenn

    Is there a lift on this ?

    summit has most brands of shocks for lifted trucks plus 1 on the tuff country shocks and on the raised steering arm might only be 3 inches in the front my stock brake lines didn't reach in the stock location, I bought steel lines from summit for a 4-6 inch lift
  17. kenn

    Is there a lift on this ?

    looks like 4 inch in front . what do the blocks in rear measure ? will get you a axle to frame measurement when I get home from work
  18. kenn

    Stepside wood removal

    I'm going to leave the diamond plate in (welded all the way around bed) and rhino line once painted . I'm going to make steel cross braces to make up for the missing wood
  19. kenn

    Stepside wood removal

    Removed all rotten wood today not to bad couple of hours and 4 or 5 grinding disk
  20. kenn

    stepside fuel filler hose and vent

    My lmc replacements come in tomorrow will check to see where the filler hole is on those and go from there
  21. kenn

    stepside fuel filler hose and vent

    ordered new fenders and steps from lmc, says fits 73-78 will measure the round hole and compare to my 78
  22. kenn

    stepside fuel filler hose and vent

    Apparently Chevy moved the fill hole on the fender up 2 inches in 77 and 78 then went to the door in 79 that's why 73-76 hose doesn't work
  23. kenn

    stepside fuel filler hose and vent

    found this online, says it was 2 inches short Mine looks like top hose
  24. kenn

    stepside fuel filler hose and vent

    I have 78 k10 stepside, both fuel filler and vent hoses are toast passenger side fender has the round hole(no door0 having trouble finding the correct hoses. LMC does have step side 73-76 called them and got measurements on the hoses vent hose from LMC is 10 1/2 inches long, mine measures...
  25. kenn

    Dash bezel

    still need a bezel ? ac or no ac ?

Latest posts

Forum statistics

Threads
42,070
Posts
908,368
Members
33,545
Latest member
GrayWK
Top