Search results

  1. A

    suburban parts 86 ish

    Does the radio still work? If so I may want it
  2. A

    diesel swap?

    Many 6.2 came w the 400 or 700r4...the 6.2 ans 6.5 are very similar.
  3. A

    stereo for 82 suburban

    I would assume it would do decent...but all the steel would probably cut down on the reception ..it would probably do better in a later model vehicle with fiberglass body panels
  4. A

    85 K10 383 4 Sale!

    Does it crank and run?
  5. A

    stereo for 82 suburban

    I actually saw that tonight in my classic parts catalog that came on the mail tonight. Its cheaper at classic parts. It's a great idea
  6. A

    truck died lots of white smoke

    Head gasket.. Not being a smart ass but every vehicle ran until it quit..
  7. A

    stereo for 82 suburban

    Im not drilling a hole in my fender...so it'll probably be mounted on a bracket of some sort
  8. A

    stereo for 82 suburban

    I wonder if that was standard issue regardless of radio delete option or not? I would think id it was I would have an antenna plug under there somewhere. I guess I could always fab up an antenna mount of some sort
  9. A

    stereo for 82 suburban

    Also the truck doesn't have a hole in the fender for the antenna...or were they located elsewhere?
  10. A

    NP 208-700r4...what gasket do i need??

    83k5..I just saw that page about an hour before I logged on here ...what'd the difference between that gasket ans the 331304A...it says various ...does that mean its all possible gaskets to go between the trans and t case? Did you find it on the macko website or a third party? On the macko...
  11. A

    where to go mudding in nc

    Bakerboys you're right down the highway from me...there's a few holes down in this end of the county and on the edge of duplin.
  12. A

    Wipers turn on with headlight switch?

    Mine swipe once randomly...I think my problems the switch ...I can look at it just right and they cone ob lol
  13. A

    no cruise control

    I did read somewhere online about 2 switches on the brake pedal having something to do w it...I think I see the switches..and one of the plungers sticks coming out...when I press the pedal it sticks up and sounds like a spring releasing when it comes out. I need a vaccum and wiring diagram. I...
  14. A

    no cruise control

    I had a few minutes earlier and pulled the breather to check for initial vaccum and to my surprise there's good vaccum so at this point im not looking at a bad pump...im thinking the controller is somewhat at fault ...I've got vaccum going in...but none out to the servo...unless it wouldn't have...
  15. A

    no cruise control

    1982 k10 suburban 6.2 diesel the cruise does not work...would someone guide me in troubleshooting it? is it vacuum activated? electronic? i know nothing about its mechanics so any help would be greatly appreciated
  16. A

    low hvac airflow

    thats good...i highly doubt i'll ever need the dash itself out...the trim and dash pad will be about it...the dash pad on my burb isnt nearly as bad as my 84 k10...i can nearly stick my damn arm through..
  17. A

    low hvac airflow

    thanks. i thought of this...im going to be replacing the dash pad in the near future so i'll probably do it then. All of the ducting can be accessed via under the dash correct? from glancing it seems fairly easy to get to without ripping the entire dash out...or am i mistaken?
  18. A

    Dash mounted console build

    :shitsweak: come on now ha previous post edited lol
  19. A

    low hvac airflow

    i know these trucks have always had a random issue with airflow...and my 82 suburban suffers from this when switched to the 'vent'... when on floor it blows hard and strong...but not on vent. is there a cabin air filter somewhere that could be stopped up? i assume the same fan supplies the...
  20. A

    Dash mounted console build

    bat pussy...i love it.. i've used 'higher than giraffe pussy' on a somewhat regular basis...but never bat pussy... i love that expression
  21. A

    NP 208-700r4...what gasket do i need??

    thanks guys... after a little more digging i found these... http://www.quad4x4.com/GM%20Transfer%20Case.htm i'm pretty sure the second listed gasket is the one i was referring to... as far as I can find...they are the only place that sells it...
  22. A

    springs not straight with each other?

    thanks guys...i believe my wrench is upto 200...so i'll just get it there...should be good
  23. A

    springs not straight with each other?

    what are the torque specs for the u bolts? the lift was on the truck when i bought it and i cant find it on the rc website
  24. A

    NP 208-700r4...what gasket do i need??

    gasket needed is for the area in red the gasket that goes between the 700r4 adapter and the t-case itself...it has 6 bolt holes...i need it but couldn't find it in any book or on the computer @ NAPA today... does anyone know what its called or where it can be ordered separately from an entire...
  25. A

    springs not straight with each other?

    i noticed tonight that my front 4" RC lift springs in the front are not flush with each other while looking straight down them. like theyre sort of 'spun' on the center bolt... is this normal?? i have no clue whatsoever...i've never seen it happen before at least

Latest posts

Forum statistics

Threads
45,586
Posts
986,944
Members
38,675
Latest member
Shak379
Top