Search results

  1. DanMcG

    Help identifying under dash connector

    What color are the wires?
  2. DanMcG

    This can't be normal!

    Dang that's more like it!. So you switched out the window frame and all to use the one piece?
  3. DanMcG

    Rear window clarification

    Did the new one come with a gasket?
  4. DanMcG

    Rear window clarification

    I didn't know the slider used a different gasket, now I need to rethink my plans. Thanks for the posts.
  5. DanMcG

    This can't be normal!

    Got that SR, I was referring to the bottom edge where it meets the metal.
  6. DanMcG

    This can't be normal!

    I was out in the pouring rain trying to figure out where the cab was leaking water, I think its the windshield. Then I notice water splashing out of the door (no door panel), so I look out side and see this. The vent window seal is tucked in behind the window opening. I guess I'll be redoing...
  7. DanMcG

    Cab Corner, Rocker Joint Question

    Thanks Guys! I just wanted to make sure I wasn't missing something.
  8. DanMcG

    Cab Corner, Rocker Joint Question

    Which part folds over, the corner? Mine doesn't but there's enough material to maybe make it work. Edit; or are you talking about the very bottom flange/ lip? thanks
  9. DanMcG

    Cab Corner, Rocker Joint Question

    Can anyone tell me if the joint in the circle was attached in any way or just seam sealed? These are aftermarket patches and the way they're stamped they'll only be getting seam sealer, but was thinking they could have been spot welded from the back side, maybe
  10. DanMcG

    Bed sills

    Are we talking stepside? A local sheet metal shop could brake what ya need.
  11. DanMcG

    Have to store outside. Truck Cover?

    how about a portable garage like shelterlogic?
  12. DanMcG

    Respirator filter for spraying epoxy?

    I've got some body parts almost ready for primer but not sure of the filter/ cartridge to use in my respirator I'm seeing 3m 6001,6006 and 60921 (I think) but not sure if they are right for what's in epoxy. Anybody know what's best? Thanks
  13. DanMcG

    Correct bumper for '78

    Yep they had to be ordered with the truck. In '78 a painted one would run ya $47 and chrome was $73. And if I'm reading it right, it looks like if you ordered a chrome front bumper, you couldn't get a painted rear, it had to be chrome. (From the GM heritage center)
  14. DanMcG

    Need Wedgewood Blue SEM 15133

    Do you know the paint code?
  15. DanMcG

    Lawn mower stator

    The stator/alternator is probably under the flywheel.
  16. DanMcG

    Bed Carriage bolt holes

    Brilliant!, I didn't know there was such a thing until I googled lag bolt washer. good to know.
  17. DanMcG

    Fuel supply issue

    For what it's worth, I have the same issue with a holley.
  18. DanMcG

    Carb line help. I'm so lost

    Cap everything ya can't figure out and enjoy it. You need the brake booster, pcv and vacuum for distributor advance.
  19. DanMcG

    Ugh!!!!!! Clear Coat Issues

    I'm pretty sure that is from the high humidity but I don't know if there is a way to correct it. Sorry I can't offer any help.
  20. DanMcG

    Ugh!!!!!! Clear Coat Issues

    What is it doing, I can't tell by the pic.
  21. DanMcG

    Best replacement floor pans?

    I think the best panels are put out by TriPlus. AMD and I think Raybucks carries them. They seem to be the proper thickness to match the original sheetmetal
  22. DanMcG

    “What’s up with that old truck” Need help with identification!

    the plow set up is worth the 500, buy it!
  23. DanMcG

    Hood emblem

    here's a better pic of the dimensions, I can get more if ya need them but it sounds like you're good to go. Good luck.
  24. DanMcG

    Hood emblem

    Here's a 80 hood, measured from the cowl edge with the tape pulled tight. I can get ya different dimensions if ya want. I have to say the large center hole looks kind of odd to me, but I'm pretty sure it's original.
  25. DanMcG

    Hood emblem

    I should be able to get ya pic and dimensions later when the sun comes up.

Latest posts

Forum statistics

Threads
48,413
Posts
1,066,845
Members
42,795
Latest member
MRmolash
Top