fast 99's latest activity
-
I have been in the car business for 40 years. I have been technician, shop foreman, dispatcher, manager and owned my owned shop. I know... -
fast 99 replied to the thread LED exterior light conversion! not going well :(.LED's are basically a computer circuit. None of the OEM parts on SB were designed for it. Any resistance not going to work.
-
fast 99 replied to the thread New here , clutch slave master cylinder help..Sounds like master on a LM Mustang. Can't be bleed on the vehicle. New are full of fluid.
-
fast 99 replied to the thread How does this sort of thing happen????.same experience, and yes my crystal ball was cracked a long time ago. One of my employers gave way too much away. We got into it...
-
fast 99 replied to the thread How does this sort of thing happen????.That's actually happened to me several times along with vehicles running out of gas either on road test or in the shop. It's very hard...
-
fast 99 replied to the thread How does this sort of thing happen????.While I agree there are shops that may do questionable work. However it is not the norm, at least here. Have been in both the towing...
-
fast 99 replied to the thread New here , clutch slave master cylinder help..Yes, clean fluid. I have found the fastest way to bleed those systems is reverse bleed. Remove all the fluid from master with a turkey...
-
fast 99 replied to the thread Power loss with aggressive acceleration.sounds like a possible lean condition fuel supply or carb
-
They bend easier and more often than you think. At some point in its life someone probably changed the pump using a Long bolt through...
-
fast 99 replied to the thread Loose timing chain replacement.If I had a cover laying around I would take a picture to show the modification. Easy to do. Front cover will be very hard / impossible...
-
fast 99 replied to the thread Intake Manifold RTV Dry Times.Working in a shop setting, no time to wait on sealers. Have installed intakes with both regular automotive RTV and Right Stuff and sent...
-
It is a 305 not a race motor. Stick with standard chain type. It was good for all these years, why go through the work and cost for no...
-
fast 99 replied to the thread Loose timing chain replacement.Hardest part will be reinstalling front cover. Will need to be modified for installation unless oil pan is removed. Corners of inner...
-
fast 99 replied to the thread AC Belt vibrations.There is a small bracket under the compressor that occasionally is left off. Will vibrate without it. Just looked at one mounted it's...
-
fast 99 replied to the thread Chrome bumpers comparison ?.Front bumper from LMC has been on 2 years. No rusting but it has been in storage for 1/2 the time. Chrome wasn't great and material is...
