Edelbrock's latest activity
-
Edelbrock replied to the thread 1988 V10 fuel lines.Bra! RATS be eat'n yo ****. When you get them fuel lines fixed, put a bunch of DECON packs up there on the gas tank. DEFCON 1 works too... -
-
Edelbrock replied to the thread edelbrock fuel line leak. Anyone else?.With a banjo, try to find softer washers. Brass, aluminum or what ever is the easiest to deform under pressure. Then all you can do is...
-
Edelbrock replied to the thread 12 bolt Rear axle ratio?.Mark the U-joint (or what the U-joint bolts to), and mark axle, near where the seal is. Then mark a spot on the wheel, and a spot on the...
-
Edelbrock replied to the thread Free, you pick up..
-
-
Edelbrock replied to the thread Rear glass sash rubber.Not sure if this is what your after, but I installed this on my K5 rear window and it works GREAT. Easy to install as well. Link...
-
This is so true. I had 4 stock wheels and tires from a '78 3/4 ton. Put them up on the corner with a for sale sign. A couple days later...
-
Fortunately the wires don't go up the column, only the actuator rod - the switch itself is actually under the dash, pretty easily...
-
Edelbrock replied to the thread Help please.Thanks - but no thanks.
-
Edelbrock posted the thread Low cost auto repair. $79 engine swaps! (no warranty) in Engine & Performance.When it comes to auto repair, there is no need to do everything by the book. If you cut corners, you save dollars. Just keep it simple...
-
-
Edelbrock replied to the thread How hard to go backwards?.I would assume that a floor mounted switch would be easy to install. Probably get one on Amazon cheap enough. The trick would be...
-
Edelbrock reacted to DoubleDingo's post in the thread What have you done to your square lately?? with
Like.
You forgot to mention your car's extended warranty is expired -
Edelbrock replied to the thread Free, you pick up..If you want them gone, just lean them up against a tree out by the road, and put a big sign next to them that says "FOR SALE - $1,500"...
-
Edelbrock replied to the thread Cracked TH350 case.I would drill a hole just past the end of the crack (to stop the crack from continuing), and then I would call around different welding...
-
Edelbrock replied to the thread Wobbly power steering pump pulley.Squeak solution: Start the engine, and hold a piece of chalk against all the different edges of the belt. This eliminates the squeak...
-
Edelbrock replied to the thread TH350 oil level, engine off.Point this **** at your **** and you will know all. $15 and no installation needed.
-
