Chris64's latest activity
-
Chris64 replied to the thread Removing instrument panel - dealing with the oil pressure line.I'm running out of plenum for them to have a nest built in and the nice thing about plastic is it can be cleaned. The only area... -
Chris64 reacted to mtbadbob's post in the thread Removing instrument panel - dealing with the oil pressure line with
Like.
Yeah, me also. I believe it's a 3/8" nut, possibly a 5/16" -
Chris64 reacted to hdchevy's post in the thread Removing instrument panel - dealing with the oil pressure line with Like.
The smaller in length the better for behind the instrument cluster. I have always disconnected from behind. I'm sure disconnecting from...
-
Chris64 replied to the thread Stripping paint off instrument panel.I ended up just painting it flat black which looks identical to the stock lower column cover. Then I used a chrome pen to highlight the...
-
-
Krylon Fusion Matte Blue
-
The vacuum module on the controls diverts vacuum to the right vacuum motors so you get air flow to defrost, heat, vent, A/C. The A/C...
-
Chris64 replied to the thread Debugging my AC problems.I don't know how else to describe the little box with all the vacuum lines that sits behind the climate controller. I call that the...
-
I haven't found any other threads with this specific problem. 1974 K-20 Cheyenne - factory air The problems so far: * Fan speed is...
-
Chris64 replied to the thread LMC AC controller has too many detents.Well I went ahead and installed it as-is because I figured I'm probably not going to find anything better, returning is a hassle and I...
-
If your not happy, 6 on the label and 7 detents.....send it back. You didn't get what you paid for. Having to put it in between is...
-
So as usual, I started a task - get my AC working - and then I got distracted with other things. * Why aren't my dash lights working...
-
-
Chris64 replied to the thread Removing instrument panel - dealing with the oil pressure line.This is a good description of where I'm at now. Dash pad, glovebox and bezel removed. left and right plenum's removed. Now I need to...
-
Chris64 reacted to 75gmck25's post in the thread Removing instrument panel - dealing with the oil pressure line with Like.
I’ve always disconnected the oil line in the engine compartment. It’s not real hard to reach, and the two nuts for the compression...
-
Chris64 reacted to RaisedK5's post in the thread Removing instrument panel - dealing with the oil pressure line with Like.
Ya. Manual says just reach up behind and take off the nut.
