Chris64's latest activity
-
Chris64 reacted to PrairieDrifter's post in the thread Removing instrument panel - dealing with the oil pressure line with
Like.
You don't need to pull the cluster to work on the hvac. Everything should come out the bottom of the dash. May have to pull the bezel... -
Chris64 posted the thread Removing instrument panel - dealing with the oil pressure line in Tech Discussion.This is a strange thing that I haven't found any help on the internet at all. It's a 1974 K-20. I was trying to remove the instrument...
-
Chris64 replied to the thread Proportioning Valve and Bleeding.I had this problem too, which sucked because my family seems to sense when I need a brake pumper and they disappear. I ended up...
-
This is the one I bought https://a.co/d/8EupJ1X
-
Chris64 replied to the thread Wanting 4" suspension suggestions.I don't plan on hardcore off-roading, but we are right next to the desert so I wouldn't want to take that option off the table. It's...
-
-
How much are you planning on twisting up the truck off road? The more articulation you have the more room in the wheel wells you need...
-
Agreed. If you're planning on street-driving with some light off-roading, a 4" lift with 35's should be fine...as long as you don't go...
-
Can't answer about the ceiling as I have never applied it up there. But as far as the doors, it makes a HUGE different putting it on the...
-
Chris64 replied to the thread Wanting 4" suspension suggestions.OK, so I'm still trying to figure out the optimal setup and I'm worried that a 4" lift just isn't enough for 35" tires. I don't want to...
-
Chris64 replied to the thread Wanting 4" suspension suggestions.Well the price is certainly right for these. https://www.amazon.com/gp/product/B000E3DU1O/ Of course that's lacking the U-bolts and...
-
Mine has 4" Skyjacker C140S softride front springs, ORD HD front greasable shackles, 4" lift blocks in the rear with factory springs...
-
Chris64 reacted to bruisedbanana79's post in the thread Wanting 4" suspension suggestions with Like.
I will add that I ordered a 4" kit directly from Tuff around black friday and was told it would ship 1/6. I finally cancelled my order...
-
Cheap would be Tuff Country EZ Ride. My experience with these is that they do ride pretty decent for off the shelf. I’d plan to buy...
-
Chris64 replied to the thread Wanting 4" suspension suggestions.They're 35x10.5 BFG AT on 10" wide wheels with a -22 offset - so they're wide-ish. Wouldn't moving the axle forward an inch require...
-
I have used that 1" zero rate spring before and thought it was cheap and easy PLUS! it raised one inch. *(rear only) Hope this helps...
