Refurbishing a grille...with wood

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

EastAustinSawdust

Full Access Member
Joined
Jan 23, 2020
Posts
68
Reaction score
104
Location
Austin, TX
First Name
Adam
Truck Year
1978
Truck Model
C10 Big Ten Bonanza
Engine Size
5.7L 350
My 78 had an original grille and emblem, and they were in rough shape. So I got a new grille and emblem (LMC). Only problem was that the aftermarket grille wasn’t designed to hold an emblem:

OEM grille:
You must be registered for see images attach


Aftermarket grille:
You must be registered for see images attach


Replacement emblem and original emblem:
You must be registered for see images attach


So I made an adapter using the materials and tools readily available to me. And that happened to be a scrap block of walnut and the woodshop in my carport.

The block was off some scrap from a friend’s cabinet shop. 8-4 walnut. Not too shabby for scrap wood.
You must be registered for see images attach


Reached the emblem and cut to shape. Not sure how, but this is evidently a comfortable position for my dog to lay in.
You must be registered for see images attach


The block needed to sit recessed in the grille, which meant cutting out detents for the plastic grates. Also cut holes to attach the emblem via those little thread cutting nuts.
You must be registered for see images attach


Ahh yes it fits perfect. Oh **** nevermind, the grille is upside down. Had to cut a few more dados in it to fit right side up.
You must be registered for see images attach


This is why I picked a really hard, dense wood. With some poly I hope that it can withstand the elements without warping/rotting. Worst case scenario I just make a new one.
You must be registered for see images attach


Fastened with a metal strap that I bent to fit the grate:
You must be registered for see images attach


There we go. Thought about sanding, finishing, and leaving as-is.
You must be registered for see images attach


Reattached metal trim with OEM thread cutting bolts, which I soaked in CLR overnight. Reattached grille. Looks good. The bumper guards are new too.
You must be registered for see images attach


Quarantine looks good on this old Bonanza.
You must be registered for see images attach



Sent from my iPhone using Tapatalk
 

EastAustinSawdust

Full Access Member
Joined
Jan 23, 2020
Posts
68
Reaction score
104
Location
Austin, TX
First Name
Adam
Truck Year
1978
Truck Model
C10 Big Ten Bonanza
Engine Size
5.7L 350
When it comes to flesh wounds, it’s hard to beat WD40’s penetrating action. But for medical reasons I use 3 in 1 oil.


Sent from my iPhone using Tapatalk
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
6,451
Reaction score
13,782
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
OK, first ,I spray with brake parts cleaner, then wipe, check damage then a blue towel ,then the WD40. Haven't tried the 3 in 1 yet!
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
That's awesome! So for the price of a cheap grille, a block of wood and some of your time, you've got a grille that would have cost a bundle otherwise. You can't beat that with a stick.
 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
10,014
Reaction score
14,159
Location
Right where I am
First Name
Bagoomba
Truck Year
1981, 1965
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s; 65-C20 with 4:57 gears and Borg Warner Overdrive
Engine Size
Carb'ed Vortec 350; 1972 L48 350
Excellent work. I hear you on the positions dogs choose to lie in, sometimes it hurts just looking at them, but they like it so they lay in weird contorts.
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
6,451
Reaction score
13,782
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
That's awesome! So for the price of a cheap grille, a block of wood and some of your time, you've got a grille that would have cost a bundle otherwise. You can't beat that with a stick.
He used the stick, Andy! Oh and Roger I've cried over my K20 a couple of times!!
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
6,451
Reaction score
13,782
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
Calm down and have a drink.
You must be registered for see images attach
"Oh, that's your answer for everything!!!"..... Where have you heard THAT before??!!
 

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,240
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
My 78 had an original grille and emblem, and they were in rough shape. So I got a new grille and emblem (LMC). Only problem was that the aftermarket grille wasn’t designed to hold an emblem:

OEM grille:
You must be registered for see images attach


Aftermarket grille:
You must be registered for see images attach


Replacement emblem and original emblem:
You must be registered for see images attach


So I made an adapter using the materials and tools readily available to me. And that happened to be a scrap block of walnut and the woodshop in my carport.

The block was off some scrap from a friend’s cabinet shop. 8-4 walnut. Not too shabby for scrap wood.
You must be registered for see images attach


Reached the emblem and cut to shape. Not sure how, but this is evidently a comfortable position for my dog to lay in.
You must be registered for see images attach


The block needed to sit recessed in the grille, which meant cutting out detents for the plastic grates. Also cut holes to attach the emblem via those little thread cutting nuts.
You must be registered for see images attach


Ahh yes it fits perfect. Oh **** nevermind, the grille is upside down. Had to cut a few more dados in it to fit right side up.
You must be registered for see images attach


This is why I picked a really hard, dense wood. With some poly I hope that it can withstand the elements without warping/rotting. Worst case scenario I just make a new one.
You must be registered for see images attach


Fastened with a metal strap that I bent to fit the grate:
You must be registered for see images attach


There we go. Thought about sanding, finishing, and leaving as-is.
You must be registered for see images attach


Reattached metal trim with OEM thread cutting bolts, which I soaked in CLR overnight. Reattached grille. Looks good. The bumper guards are new too.
You must be registered for see images attach


Quarantine looks good on this old Bonanza.
You must be registered for see images attach



Sent from my iPhone using Tapatalk
Hate to break it to you, walnut is not a very dense wood (when considering hard hardwoods)It's actually
pretty soft. If you don't believe me (as a Forester) just google the density and the hardness scale.

A white oak, or Hickory or hard maple would have been a better choice. But good work though. Dip it in plenty of protective coats and it should last.
 

Forum statistics

Threads
41,851
Posts
903,487
Members
33,365
Latest member
rossivey
Top