What new tools have you got lately?

[legopnuematic]

Been 3D printing various things for around the shop.

A couple of pliers racks

You must be registered for see images attach

Release handle for my hydraulic press

You must be registered for see images attach

Some screwdriver organizers. The hex keys and punch/chisel storage is upcoming.

You must be registered for see images attach

 

[Ricko1966]

Worthy a check:

https://www.homedepot.com/pep/Gator-Grip-3-8-in-Universal-Socket-with-Power-Drill-Adapter-ETC120A/100351756?source=shoppingads&locale=en-US&fp=ggl&pla=&mtc=SHOPPING-BF-CDP-GGL-D25H-025_001_HAND_TOOLS-NA-Multi-NA-PLALIA-NA-NA-NA-NA-NBR-NA-NA-NA-Hand_Tools_PLATEST&cm_mmc=SHOPPING-BF-CDP-GGL-D25H-025_001_HAND_TOOLS-NA-Multi-NA-PLALIA-NA-NA-NA-NA-NBR-NA-NA-NA-Hand_Tools_PLATEST-21934288064-173688791471-2446597216788&gclsrc=aw.ds&gad_source=1&gad_campaignid=21934288064&gbraid=0AAAAADq61Ue10yG1jaACWCXoBtaVLjDpp&gclid=CjwKCAjwgO7RBhBKEiwAZNP85t6kMG6Xpl0w_Kyu4cRZBNiZ0-UlRUT97SmaShZjNHaVmvCZbfRaZhoC9fkQAvD_BwE

I think this is what that video showed

 

[WFO]

Didn't get but wanted to share:

xc_hide_links_from_guests_guests_error_hide_media

A pipe wrench would've worked to loosen all of those in the video.

 

[waterpirate]

Been 3D printing various things for around the shop.

A couple of pliers racks

You must be registered for see images attach

Release handle for my hydraulic press

You must be registered for see images attach

Some screwdriver organizers. The hex keys and punch/chisel storage is upcoming.

You must be registered for see images attach

I will gladly pay you for one of those jack release wheels for my air over hydraulic press. Let me know what is needed and a price.
Eric

 

[bucket]

I will gladly pay you for one of those jack release wheels for my air over hydraulic press. Let me know what is needed and a price.
Eric

Yeah, me too!

 

[78C10BigTen]

I will gladly pay you for one of those jack release wheels for my air over hydraulic press. Let me know what is needed and a price.
Eric

I was thinkin that for my air over hydraulic jack i use to lift our trucks and trailers lol

 

[Mr Clean]

Worthy a check:

https://www.homedepot.com/pep/Gator-Grip-3-8-in-Universal-Socket-with-Power-Drill-Adapter-ETC120A/100351756?source=shoppingads&locale=en-US&fp=ggl&pla=&mtc=SHOPPING-BF-CDP-GGL-D25H-025_001_HAND_TOOLS-NA-Multi-NA-PLALIA-NA-NA-NA-NA-NBR-NA-NA-NA-Hand_Tools_PLATEST&cm_mmc=SHOPPING-BF-CDP-GGL-D25H-025_001_HAND_TOOLS-NA-Multi-NA-PLALIA-NA-NA-NA-NA-NBR-NA-NA-NA-Hand_Tools_PLATEST-21934288064-173688791471-2446597216788&gclsrc=aw.ds&gad_source=1&gad_campaignid=21934288064&gbraid=0AAAAADq61Ue10yG1jaACWCXoBtaVLjDpp&gclid=CjwKCAjwgO7RBhBKEiwAZNP85t6kMG6Xpl0w_Kyu4cRZBNiZ0-UlRUT97SmaShZjNHaVmvCZbfRaZhoC9fkQAvD_BwE

I had one of those, my youngest daughter got me for father's day years and years ago. IT SUCKED!

 

[Mr Clean]

Got the plates for tow alignment from TMR. They had them on sale, and I had a 30.00 credit... so I got them for 33.00 shipped. Used them this morning on my buddies son's truck. So I sandblasted them and powder coated them with Candy Lime.

 

[78C10BigTen]

Got me some tools from the 4wd show. 2 sets of short 1/2 drive impacts that dont skip sizes, a nut splitter, a door handle clip tool, a nice lil dead blow hammer for my gun projects, some small brushes and magnet tray, a set of flush cuts, a handfull of paint markers and a never go wrong 10mm ratchet wrench! Lol

You must be registered for see images attach

You must be registered for see images attach

 

[PrairieDrifter]

Finally got a toolbox, us general 56 inch. It's pretty decent honestly, pretty filled up other than the wrench drawer, have been slacking in that department.

You must be registered for see images attach

Also got a jack, my vintage one has started leaking pretty heavily and needs a resto. This one is also portable lolol.

You must be registered for see images attach

 

[bucket]

Finally got a toolbox, us general 56 inch. It's pretty decent honestly, pretty filled up other than the wrench drawer, have been slacking in that department.

You must be registered for see images attach

Also got a jack, my vintage one has started leaking pretty heavily and needs a resto. This one is also portable lolol.

You must be registered for see images attach

I like the color of your walls. Have I mentioned that before? Pretty sure I have, but it was worth repeating, lol.

 

[Radiohead]

Somewhere, someone mentioned HF centering punches and so I finally decided $13 was cheap enough to get some holes that matched first shot. Can't wait to try them out.

 

[PrairieDrifter]

I like the color of your walls. Have I mentioned that before? Pretty sure I have, but it was worth repeating, lol.

Don't think I've ever heard that one! Figured the consensus would be opposite! It's our small towns old elementary school, it's probably still lead paint too lol

 

[86k20-ds]

Went to harbor freight and got their Pittsburgh pro torque wrenches because they are on sale right now. Now I’ll actually be able to torque things to spec!

 

[Ricko1966]

Finally got a toolbox, us general 56 inch. It's pretty decent honestly, pretty filled up other than the wrench drawer, have been slacking in that department.

You must be registered for see images attach

Also got a jack, my vintage one has started leaking pretty heavily and needs a resto. This one is also portable lolol.

You must be registered for see images attach

That little pit box on the right put that in a BBQ grill for your driveway tool box. Comes in handy. You can fit a pit box in the top with extra room for other stuff the bottom doors house a boat battery and a battery charger.No one looks in a BBQ grill so I feel safe leaving tools in that one. The little side wings make a nice work table. That's not a joke. That is my outside toolbox because I'm too lazy to walk to and through the barn everytime I need something.