What new tools have you got lately?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

waterpirate

Full Access Member
Joined
Jan 2, 2019
Posts
1,053
Reaction score
2,631
Location
delaware
First Name
Eric
Truck Year
1987
Truck Model
v10
Engine Size
5.7 tbi
You know,to pull the nails through,or clip them off on the backside? Right. Don't try to pull them out the front.
I get that, but. A little back story and a update. Kitchen window over the sink circa 1960. Cabinets were built in run along the wall on both sides of the sink. Pulled the window trim today and the cabinets on either side dropped an inch. The window trim was holding the cabinets up! Put a support under each side and pressed on. The kitchen is the addition that was put on in the 60's re muddle. Original house was built turn of the century. Every day is an adventure. lol Still breathing and positive outlook. IDKW
Eric
 

1STLS1

Full Access Member
Joined
Dec 9, 2018
Posts
268
Reaction score
691
Location
West Phoenix AZ
First Name
MIchael
Truck Year
1985
Truck Model
K10
Engine Size
350
Picked this up at a local on line auction, it's looking a little rough but I will know more once I have some time to tinker with it. It had fuel in it that wasn't horrible, we will see.

Its a Honda EW 171, basically a 171 amp arc welder or a 4000 watt generator, $227 at auction. Not sure if it was a deal, you can buy them new at HF For $4-500 bucks. At least it will match my truck,
You must be registered for see images attach
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
6,838
Reaction score
11,748
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Picked this up at a local on line auction, it's looking a little rough but I will know more once I have some time to tinker with it. It had fuel in it that wasn't horrible, we will see.

Its a Honda EW 171, basically a 171 amp arc welder or a 4000 watt generator, $227 at auction. Not sure if it was a deal, you can buy them new at HF For $4-500 bucks. At least it will match my truck,
You must be registered for see images attach
Yea,bad deal, I was at an auction to deep in the back though,thought I was buying a name brand beat up unit from where I was. Nope I was buying a beat up Harbor Freight unit. My bad! LOL Hey !!!! I thought this was the did @Mr Clean get a new tool today thread!
 
Last edited:

hoagster

Full Access Member
Joined
May 16, 2017
Posts
1,581
Reaction score
3,890
Location
California
First Name
Mike
Truck Year
1973, 2000
Truck Model
K10, 1500
Engine Size
5.3l
Picked this up at a local on line auction, it's looking a little rough but I will know more once I have some time to tinker with it. It had fuel in it that wasn't horrible, we will see.

Its a Honda EW 171, basically a 171 amp arc welder or a 4000 watt generator, $227 at auction. Not sure if it was a deal, you can buy them new at HF For $4-500 bucks. At least it will match my truck,
You must be registered for see images attach
Throw it in the back and you'll have a portable EV charger get your money back!
 

Latest posts

Forum statistics

Threads
45,868
Posts
994,712
Members
39,040
Latest member
xanderson
Top