Vent window latch replacement
- Thread starter Old77
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Aug 19, 2010
- Posts
- 28,263
- Reaction score
- 8,736
- Location
- Kansas City, Mo
- First Name
- Jacob
- Truck Year
- 1977/1990/1991
- Truck Model
- C10 longbed/R1500 Burb/R3500 Dually
- Engine Size
- 350/350/454
Channel locks worked! 
So @donmateo....to get the pin out use a small punch and hammer. Be careful to not miss and hit the glass though lol to get it back in start the pin on the work bench. Once on the truck go the rest of the way with it either via light hammer tapping or channel locks which is what I used. A second set of hands may be handy to hold the latch on while you get the pin all the way in
So @donmateo....to get the pin out use a small punch and hammer. Be careful to not miss and hit the glass though lol to get it back in start the pin on the work bench. Once on the truck go the rest of the way with it either via light hammer tapping or channel locks which is what I used. A second set of hands may be handy to hold the latch on while you get the pin all the way in
- Joined
- Aug 19, 2010
- Posts
- 28,263
- Reaction score
- 8,736
- Location
- Kansas City, Mo
- First Name
- Jacob
- Truck Year
- 1977/1990/1991
- Truck Model
- C10 longbed/R1500 Burb/R3500 Dually
- Engine Size
- 350/350/454
Thank you all for the quick replies!!!
donmateo
Full Access Member
- Joined
- May 29, 2015
- Posts
- 650
- Reaction score
- 3
- Location
- WI
- First Name
- Matt
- Truck Year
- 1982
- Truck Model
- K10
- Engine Size
- 350 TBI
Channel locks worked!
So @donmateo....to get the pin out use a small punch and hammer. Be careful to not miss and hit the glass though lol to get it back in start the pin on the work bench. Once on the truck go the rest of the way with it either via light hammer tapping or channel locks which is what I used. A second set of hands may be handy to hold the latch on while you get the pin all the way in
Awesome! Thank you! Hopefully this kills the wind noise and stops the great floods. lol
I just ordered my tank brackets, so once those are painted and installed I'll probably get this.
