Thinking about streamlining my tools.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
5,319
Reaction score
20,093
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
5,319
Reaction score
20,093
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
I have Milwaukee, Makita, Hercules, and Snap On. And some old Ryobi, but the batteries have pretty much called it quits.

My Milwaukee stuff started with three old M18 drills, two batteries and two chargers for $10 total. Like 2008 old. They all still work mostly lol. I started adding to the collection with the 1/2” high torque (at the time, 2019), catching things on various deals here and there. I have amassed a pretty good collection of M12 and M18 stuff.

Makita I have because Tractor Supply had messed up a promo deal about 5 years ago, it was supposed to be buy a drill and impact kit for like $279, get a free tool. They had it backwards of buy the free tool (I got the inflator) and get the drill and impact for free. So I got three tools, charger and two batteries for $99.

Hercules I got because I wanted a 1/4 square impact without spending Milwaukee money, and got the 3” sander polisher. Both work well for what they are.

Snap on is a 3/8 cordless ratchet my dad found on the side of the road. Had to buy a charger for it.

This probably doesn’t help any, but for me the stuff I have and use is pretty situational.
 

bigcountry78

Full Access Member
Joined
Apr 16, 2013
Posts
3,968
Reaction score
9,633
Location
Hickory, North Carolina
First Name
James
Truck Year
1978
Truck Model
K10 Custom Deluxe
Engine Size
350
I do that, and also Home Depot and Tractor Supply. Might end up at HD because of gift cards, basically discounted or free
Good point, I checked Home Depot and found the same saw/battery deal for $30 less. Goes until October 31st as well, instead of ending today.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
10,167
Reaction score
19,654
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
And at these prices one can almost afford to experiment with 3rd party batteries, I just don't like leaving them on chargers unattended but that's with any Lipo battery:

A friend was given some Temu Milwaukee batteries. Only way i know this is there was a battery laying in the driveway. I picked it up and said Adam I found this in your driveway I didn't want it to get rained on. He told me I don't want it in my house,my uncle gave me these he h
got off temu. This one started smoking,I was afraid it was going to catch fire,so I threw it outside. I won't touch them,you want them? No I didn't.
 
Last edited:

Sad Sack

Supporting Member
Supporting Member
Joined
Sep 3, 2024
Posts
2,945
Reaction score
6,080
Location
Nebraska
First Name
Goober
Truck Year
1985
Truck Model
C15
Engine Size
305
A friend was given some Temu Milwaukee batteries. Only way i know this is there was a battery laying in the driveway. I picked it up and said Adam I found this in your driveway I didn't want it to get rained on. He told me I don't want it in my house,my uncle gave me these he hot off temu. This one started smoking,I was afraid it was going to catch fire,so I threw it outside. I won't touch them,you want them? No I didn't.
Yup, sometimes it's a crap shoot, with emphasis on crap, but so far I've been good to go with mine.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
9,558
Reaction score
17,536
Location
The Right side of Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Yup, sometimes it's a crap shoot, with emphasis on crap, but so far I've been good to go with mine.
Livin on the edge…
I took over a guys email at work who got fired a few years ago so I could straighten out his mess.
If I ever had a thought of clicking on Temu prior to that, it was squashed immediately following the 6 or 9 spam emails a day and their refusal to unsubscribe that email. Had to block sender. And I’m not sure Temu didn’t get around that.
It also helped explain why this guy couldn’t seem to do his job worth a fck. If you’re a senior project manager for 8 figure construction projects and you’re surfing Temu, you have issues! Lol
 

Sad Sack

Supporting Member
Supporting Member
Joined
Sep 3, 2024
Posts
2,945
Reaction score
6,080
Location
Nebraska
First Name
Goober
Truck Year
1985
Truck Model
C15
Engine Size
305
Livin on the edge…
I took over a guys email at work who got fired a few years ago so I could straighten out his mess.
If I ever had a thought of clicking on Temu prior to that, it was squashed immediately following the 6 or 9 spam emails a day and their refusal to unsubscribe that email. Had to block sender. And I’m not sure Temu didn’t get around that.
It also helped explain why this guy couldn’t seem to do his job worth a fck. If you’re a senior project manager for 8 figure construction projects and you’re surfing Temu, you have issues! Lol
No problems with site on my end, just don't use the phone app, no no no.
 

goldpack

Full Access Member
Joined
Jul 8, 2025
Posts
615
Reaction score
1,199
Location
Adirondacks, NY
First Name
Donnie
Truck Year
1986
Truck Model
GMC C2500 Camper Spec.
Engine Size
350 with 350 3 speed
A friend was given some Temu Milwaukee batteries. Only way i know this is there was a battery laying in the driveway. I picked it up and said Adam I found this in your driveway I didn't want it to get rained on. He told me I don't want it in my house,my uncle gave me these he hot off temu. This one started smoking,I was afraid it was going to catch fire,so I threw it outside. I won't touch them,you want them? No I didn't.
I think littering a Molotov cocktail, and attempted arson are actually against the law.

my municipal dumps/ transfer stations want them,... (so old junk, or new junk, NO fee to pay,...and any day is good, not just special haz-mat days)
.they just want them empty so they don't set the receptacles on fire.
(hopefully recycled into a better battery)
 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
14,026
Reaction score
24,139
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Livin on the edge…
I took over a guys email at work who got fired a few years ago so I could straighten out his mess.
If I ever had a thought of clicking on Temu prior to that, it was squashed immediately following the 6 or 9 spam emails a day and their refusal to unsubscribe that email. Had to block sender. And I’m not sure Temu didn’t get around that.
It also helped explain why this guy couldn’t seem to do his job worth a fck. If you’re a senior project manager for 8 figure construction projects and you’re surfing Temu, you have issues! Lol
Yep, good he got the axe
 

bigcountry78

Full Access Member
Joined
Apr 16, 2013
Posts
3,968
Reaction score
9,633
Location
Hickory, North Carolina
First Name
James
Truck Year
1978
Truck Model
K10 Custom Deluxe
Engine Size
350
Found this at Home Depot. Has everything I need except for the 1/2” impact. Kinda want a 3/8’s impact also to round out the group. Tempted to sell everything and start over with this. Definitely overkill for what I’m doing, but would last me forever. So after two days or research, I still don’t know what I’m doing lol.
You must be registered for see images attach
 
Last edited:

Shorty81

Baby Boomer
Joined
Mar 19, 2018
Posts
3,487
Reaction score
6,972
Location
North West ohio
First Name
Darren
Truck Year
86
Truck Model
K20
Engine Size
496
I'm a industrial mechanic. We use Milwaukee tools exclusively. Some I own, some are company owned. They tend to hold very well to extreme abuse. Tools like grinders, drills and blowers work better with 8ah and 12ah batteries, they tend not to overheat as quickly. We use Metabo corded tools also, they are awesome. Milwaukee gets my vote.
 

bigcountry78

Full Access Member
Joined
Apr 16, 2013
Posts
3,968
Reaction score
9,633
Location
Hickory, North Carolina
First Name
James
Truck Year
1978
Truck Model
K10 Custom Deluxe
Engine Size
350
Still not really any closer to figuring out what I want to do. However, I’ve still been researching and what I’m finding out is that even though dewalt costs more, their lower end tools are still brushed. If you want brushless, you’re getting into $220 plus price range per tool, without batteries. The sawzall I currently have is a brushed model, which may explain some of the issues I had. But it’s $100+ to step up to the brushless model. Same with the circle saws, $160 gets the brushed model and $230+ gets you into the brushless line.

That being said, I’m researching kobalt again. Their batteries are generally cheaper, and it looks like most of their models are brushless for the same or nearly the same as the brushed dewalt models. For casual homeowner stuff, they should be sufficient without breaking the bank. I’ve used the 1/2” impact since 2020 and it’s always done what I asked. Maybe I should stick with something that has worked well for me. I have quite a few handheld tools from kobalt as well, and I don’t actually have any complaints from any of them. I’ve done everything from ATV tire changes, to brake jobs to full mechanical repairs with them. Out of all my current lineup, the dewalt would likely be the easiest to sell second hand.

Or maybe I should leave well enough alone and find something else to analyze to death.
 
Last edited:

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
14,026
Reaction score
24,139
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Still not really any closer to figuring out what I want to do. However, I’ve still been researching and what I’m finding out is that even though dewalt costs more, their lower end tools are still brushed. If you want brushless, you’re getting into $220 plus price range per tool, without batteries. The sawzall I currently have is a brushed model, which may explain some of the issues I had. But it’s $100+ to step up to the brushless model. Same with the circle saws, $160 gets the brushed model and $230+ gets you into the brushless line.

That being said, I’m researching kobalt again. Their batteries are generally cheaper, and it looks like most of their models are brushless for the same or nearly the same as the brushed dewalt models. For casual homeowner stuff, they should be sufficient without breaking the bank. I’ve used the 1/2” impact since 2020 and it’s always done what I asked. Maybe I should stick with something that has worked well for me. I have quite a few handheld tools from kobalt as well, and I don’t actually have any complaints from any of them. I’ve done everything from ATV tire changes, to brake jobs to full mechanical repairs with them. Out of all my current lineup, the dewalt would likely be the easiest to sell second hand.

Or maybe I should leave well enough alone and find something else to analyze to death.
Paralysis by analysis, good to know I'm not the only one that deals with that
 

Latest posts

Forum statistics

Threads
48,663
Posts
1,074,114
Members
43,330
Latest member
73jacobs
Top