Hillbilly
Member
- Joined
- Sep 21, 2017
- Posts
- 37
- Reaction score
- 8
- Location
- Loganville,ga
- First Name
- Billy
- Truck Year
- 1981
- Truck Model
- K10 4x4
- Engine Size
- 400sbc
These lights are not working , every other lights are, where to start troubleshooting at?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I’ve in the past scraped the coating off and soldered jumpers on but you gotta be careful easiest way would be to change out the printed circuit with one with the same gauge packageThanks yea the tag lights are brand new side markers are not
Yea I seen the little plug socket upstream, I’ll check for power to the plug,then look at sockets, hey one other thing my circuit board sheet on the gauge cluster some of the tracks have cracks on them
So I have not lights for speedo and gas gauge,can I run a jumper somewhere to catch power at a good connections to make them work?
Thanks, HILLBILLY