-
-
Slooptin replied to the thread Busted rear shock mount.Yeah I’ve got a welding blanket and some magnets to go between the tank too. Was worried about pulling the body to get a good bevel on... -
Slooptin replied to the thread 305 tbi heads on a 350 tbi?.I figured, but my truck is more of a dd/offroad rig so doesn’t see much top end anyway. Just wondering if it’s worth while for a bit...
-
Would smaller chamber 305 heads give me a bump in low end torque on a 350 tbi? Truck mostly stays below 3500 and a bump in torque would...
-
In the process of swapping springs/shocks on my suburban and discovered the rear shock mount broken (see pics). My first thought is to...
-
-
Good exhaust makes power down low too.
-
Slooptin replied to the thread Exhaust collectors for manifolds.I considered them but they're over 2x the price of stock manifolds and this truck rarely sees anything over 3k rpm
-
-
Slooptin replied to the thread Exhaust collectors for manifolds.Those manifolds are basically what I’m going with except mine will have an o2 sensor port on the driver’s side (tbi engine). Those...
-
To what I had removed from my 76 and 79, yes. Only difference is those have that ‘pilot’ to hold that donut gasket in place, the ones I...
-
Slooptin replied to the thread Exhaust collectors for manifolds.That looks like it would work. Is that similar to what came stock on these trucks?
-
These might be suitable for your application? Otherwise if you have a decent exhaust shop around you they should be able to put that...
-
Going back to manifolds on my sbc as the shorty headers leak constantly and make messing with plugs impossible. Anyone know where to...
-
-
Loading…
-
Loading…
