Stock 350 with SM465 4speed

[C10Big10]

Looking to replace clutch/flywheel
Never attempted before
Looking for any advice suggestions on clutch kits or how to info.
Motor is stock. Nothing fancy. Just need to be functional
Thank you

 

[CountKrunk]

Probably is on YT

 

[77Dmax]

No need to replace the flywheel, it can.be resurfaced at any machine shop.

It's pretty straightforward, drop the trans and send it.

 

[75gmck25]

Resurfacing should work fine, but make sure you look for cracks first.

 

[PrairieDrifter]

We always resurfaced the flywheel. Have to pull the shift handle and clutch linkage and a wire or two if they're still there, speedo cable, and driveshaft.

Pull entire transmission including bell housing. Do a throwout bearing now too, even if it seems decent.