Rochester 2Jet 2GC

[Geektrucker]

Looking for a good 2GC carb to replace the marine crap one I have now. Needing rebuild is ok as long as it was a good running carb. Inexpensive would be a bonus too!

Sent from my SCH-R970 using Tapatalk

 

[Geektrucker]

Would also consider other brands / makes of 2 barrels

Sent from my SCH-R970 using Tapatalk

 

[Jarhead79]

Do a search for quadrajet power here on the site, he builds and rebuilds quadrajet carbs

 

[Geektrucker]

Do a search for quadrajet power here on the site, he builds and rebuilds quadrajet carbs

Gotta be 2 barrel, dont have the intake for a 4 barrel...yet. Going on my L6 250

Sent from my SCH-R970 using Tapatalk

 

[Jarhead79]

Maybe he will have a dual jet laying around?! Lol

 

[Quadrajet Power]

I do have a few 2bbls sitting around. I can look and see what I have and see if anything might work for you.
I only build quadrajets now, but I take in all kinds of things on trade.

 

[Geektrucker]

I do have a few 2bbls sitting around. I can look and see what I have and see if anything might work for you.
I only build quadrajets now, but I take in all kinds of things on trade.

Thanks Quadrajet, let me know.

Sent from my LG-UK495 using Tapatalk

 

[Longbed'78]

If you still have the factory Vara-jet intake, you won't be able to use a 2-GC carb. on it. The Vara-jet has two different size throttle plates; where as, the 2GC are the same and open together.

 

[Geektrucker]

If you still have the factory Vara-jet intake, you won't be able to use a 2-GC carb. on it. The Vara-jet has two different size throttle plates; where as, the 2GC are the same and open together.

Already have the adapter from Monojet to the currently used 2jet. The monojet had a bad throttle plate rod, I was given this 2gc, but it's marine and sat for years before I rebuilt it, but the carb is crap... I can't cruise in town @ 20mph in 2nd without it bucking and spitting & sputtering. WOT and idle are fine, but the off idle circuit is f'd up, even after a dunk..hence why I need a 2bbl!

Sent from my SCH-R970 using Tapatalk

 

[Quadrajet Power]

I have a 7041105 that is probably buildable I found on my shelf. Would be originally for a 71 Chevy.

The throttle operates. It was sitting on my shelf in shop so hasn't been rained on. I have a variety of carbs that have been part of a bulk purchase of cores or someone has dropped of for me. I can build these if you would need me to, I just focus on the quadrajets now.

If this would work for you and you need it as is, I'll be glad to send it to you.

 

[Geektrucker]

I have a 7041105 that is probably buildable I found on my shelf. Would be originally for a 71 Chevy.

The throttle operates. It was sitting on my shelf in shop so hasn't been rained on. I have a variety of carbs that have been part of a bulk purchase of cores or someone has dropped of for me. I can build these if you would need me to, I just focus on the quadrajets now.

If this would work for you and you need it as is, I'll be glad to send it to you.

I think that'd work. How much for it rebuilt, shipped to 04008? I have the dead monojet and this crappy marine 2GC I'd give you if you want.

Sent from my SCH-R970 using Tapatalk

 

[Geektrucker]

Also, just FYI.. the block casting on this 250 says it's from 67 - 72, so it'd even be correct year!

Sent from my SCH-R970 using Tapatalk

 

[Quadrajet Power]

I would build it fresh, all new internals and ship to you for $200 total.
That includes complete disassembly, soak, ultrasonic cleaned, and all my normal processes.

 

[Mr Clean]

I would build it fresh, all new internals and ship to you for $200 total.
That includes complete disassembly, soak, ultrasonic cleaned, and all my normal processes.

That's a good price, and that includes shipping.

 

[Quadrajet Power]

That's a good price, and that includes shipping.

Thanks. I do my best to keep cost low on my all my builds. Just trying to help out when I can.