CKE142B
Junior Member
- Joined
- Feb 28, 2018
- Posts
- 1
- Reaction score
- 0
- Location
- York PA
- First Name
- Clark
- Truck Year
- 1987
- Truck Model
- K10
- Engine Size
- 5.7L
My brother swapped his THM700R4 automatic transmission for an NP440 (A833) manual trans in his '87 K10 pickup with Tilt Steering.
Does anyone know how to route the Reverse lights wire that runs from the trans to inside the cab? Where in the world does it get connected once inside the cab? Where does the connector get connected?
I see the connection block on the column is different between tilt and non tilt steering columns, is it different between Manual and Automatic transmissions?
I looked in the Service Manual for '87 trucks but can't seem to find the info. If anyone out there with NP440 could drop me some images, it would be greatly appreciated.
Does anyone know how to route the Reverse lights wire that runs from the trans to inside the cab? Where in the world does it get connected once inside the cab? Where does the connector get connected?
I see the connection block on the column is different between tilt and non tilt steering columns, is it different between Manual and Automatic transmissions?
I looked in the Service Manual for '87 trucks but can't seem to find the info. If anyone out there with NP440 could drop me some images, it would be greatly appreciated.
