Power Windows/Locks Harness. Does anyone make the cab harness?

[Will Weaver]

Hi, my 85' K10 standard cab came equipped with manual locks and windows. I'm converting to power everything, I have the donor doors but do not have a donor harness. Is there a company that makes the interior wiring harness for both locks and windows or is it best to just try to find a donor.

Also, what type of connectors do they use for the power windows in-between the cab and door? Maybe I can make my own.

Lastly, what connector is used to connect the rear wiring harness for the tail lights to the "cable" that runs on the frame to the cab. I put a new rear wiring harness in just need to connect it to the cable. Someone butchered mine for a trailer.

Thanks!

 

[Juggernaut]

Good luck on the power window harness. I searched e-bay for a couple years and couldn't find anyone reproducing it. Finally just cut off the connectors I had and ran new wire straight to the switches and relays. I can help you with the connector, possibly. Does the 85 have the same round rubber connector with 4 flat pins like the 70's trucks? If so, I have several. Where in IL are you? If I'm in the area, I'll just give you one

 

[Will Weaver]

Good luck on the power window harness. I searched e-bay for a couple years and couldn't find anyone reproducing it. Finally just cut off the connectors I had and ran new wire straight to the switches and relays. I can help you with the connector, possibly. Does the 85 have the same round rubber connector with 4 flat pins like the 70's trucks? If so, I have several. Where in IL are you? If I'm in the area, I'll just give you one

Yeah I think im just going to make it. Bought some wire loom and I work as an electrician so wire ain’t a problem. I put 2 pictures of what I have on my phone already down below. What about the lock connectors? Im about 30 mins south of Rockford. Thanks

 

[Will Weaver]

Good luck on the power window harness. I searched e-bay for a couple years and couldn't find anyone reproducing it. Finally just cut off the connectors I had and ran new wire straight to the switches and relays. I can help you with the connector, possibly. Does the 85 have the same round rubber connector with 4 flat pins like the 70's trucks? If so, I have several. Where in IL are you? If I'm in the area, I'll just give you one

 

[Doppleganger]

That was the decision I came to - found new switch and motor plug ends, then made my own harnesses with relays and better wire. So much better than the original wiring.

 

[Juggernaut]

Looks like your 85 connectors are different from what I have.