Mory Rugg
Junior Member
- Joined
- May 23, 2018
- Posts
- 14
- Reaction score
- 9
- Location
- West Fargo
- First Name
- Mory
- Truck Year
- 1980
- Truck Model
- K10
- Engine Size
- 350
After some research and investigation, it would appear that I have a driven gear issue. As I separated the speedo cable and took off what I believe is a ratio adapter, they all appear to be in working condition (the cable spins the speedometer and the adapter turns as well). So this leaves the removal of the speedometer drive adapter nut. It's 1-1/8, I've soaked it in some penetrating lube, but it's not budging, any pointers or special tools I should be looking at? I don't have the most expensive tools (duralast) and I've found the wrenches and sockets are not the most accurate in terms of fitment, and do flex some. Some pointers would be helpful, and thanks in advance.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach