Doppleganger
Full Access Member
- Joined
- May 24, 2019
- Posts
- 11,822
- Reaction score
- 54,665
- Location
- OH-MI: Just like it sounds
- First Name
- Chris
- Truck Year
- 1985
- Truck Model
- K20
- Engine Size
- 5.7
I need a PN for the lock ring on the left. These are from a main shaft of a 208c transfer case, but one is obviously thinner than the other. I need the thicker one on the left. I see these online everywhere but no one lists the dimensions. Mine is tweaked so measurements can be +/- a tad. 2.52 OD; 2.085 ID; .22 band width; .11 thickness. Here is a pic of where it goes.
Had an ebay seller send me one and it was the ring on the right.....wrong one. Any help (or if you have one?) would be most appreciated. Thanks in advance.
You must be registered for see images attach
You must be registered for see images attach
Had an ebay seller send me one and it was the ring on the right.....wrong one. Any help (or if you have one?) would be most appreciated. Thanks in advance.
Last edited:
