Hidden Rattle Found, Update Not Found!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ron Sebastian

Full Access Member
Joined
Nov 8, 2018
Posts
347
Reaction score
473
Location
Vero Beach
First Name
Ron
Truck Year
1987
Truck Model
Custom Deluxe V10
Engine Size
350
PSA! look under those thick bed mats every so often. The two most forward bed bolts where gone. Here is what was in one of the holes. This is what a 38 year old bed bolt looks like when not inspected. Well after a short drive, this was not the rattle I was hearing. Still a good thing to find and take care of.
You must be registered for see images attach
 
Last edited:

Redfish

Full Access Member
Joined
Nov 6, 2021
Posts
3,750
Reaction score
19,676
Location
Prairieville, LA
First Name
Andrew
Truck Year
1987
Truck Model
V1500
Engine Size
350/5.7
PSA! look under those thick bed mats every so often. The two most forward bed bolts where gone. Here is what was in one of the holes. This is what a 38 year old bed bolt looks like when not inspected.
You must be registered for see images attach
I don't think that one was holding much. Just sayin...
 

Strick

Full Access Member
Joined
Nov 25, 2020
Posts
2,027
Reaction score
5,822
Location
Dunn, NC
First Name
Harold
Truck Year
1979
Truck Model
C20 Crew
Engine Size
350
No bed mats, liners or spray-in coating. Bareback.

HS
 

Hilllbilly

Full Access Member
Joined
Sep 30, 2024
Posts
765
Reaction score
1,509
Location
PNW
First Name
Elon
Truck Year
1981, 72, 67, 65
Truck Model
k20, c10
Engine Size
472
Make a nice ear ring
 

Ron Sebastian

Full Access Member
Joined
Nov 8, 2018
Posts
347
Reaction score
473
Location
Vero Beach
First Name
Ron
Truck Year
1987
Truck Model
Custom Deluxe V10
Engine Size
350
Well I would have put money on that was the rattle. It wasn't! it's still there. Somewhere out back either cab back, bed or something in-between. Nothing loose that I can see or find. Damn it!
 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
13,903
Reaction score
23,751
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Check rear shock mount studs to frame. That was the source of my rattles that I couldn't locate. In my case the rear shocks were froze-up/locked-up, causing the studs to move around in the frame hole.
 

Doppleganger

Full Access Member
Joined
May 24, 2019
Posts
14,276
Reaction score
67,306
Location
OH-MI: Just like it sounds
First Name
Chris
Truck Year
1985
Truck Model
K20
Engine Size
5.7
PSA! look under those thick bed mats every so often. The two most forward bed bolts where gone. Here is what was in one of the holes. This is what a 38 year old bed bolt looks like when not inspected.
You must be registered for see images attach
I think you could hand forge one that was straighter.
 

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
6,946
Reaction score
25,631
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
Try only latching your tailgate on the first catch. Our '76 shop truck squeaks like a **** with the tailgate all the way closed. Push it in just on the first catch and it's quiet
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
9,429
Reaction score
17,285
Location
The Right side of Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
PSA! look under those thick bed mats every so often. The two most forward bed bolts where gone. Here is what was in one of the holes. This is what a 38 year old bed bolt looks like when not inspected. Well after a short drive, this was not the rattle I was hearing. Still a good thing to find and take care of.
You must be registered for see images attach
But your truck looks SO clean…
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
9,429
Reaction score
17,285
Location
The Right side of Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Nope, everything's there. It might be the new/dry links

You must be registered for see images attach
Reminds me. I need some for the 77, but it doesn’t rattle…
Another plus of that ole brown truck being a truck camper truck. The tailgate probably spent 35 years leaning up against a wall somewhere. It’s a beauty. Even the handle isn’t bent lol.
 

Fat 454

Full Access Member
Joined
Jul 24, 2012
Posts
382
Reaction score
605
Location
Australia
First Name
Andy
Truck Year
1973
Truck Model
C20 Suburban
Engine Size
454
Just had to replace the rear muffler on my sons truck. Made an annoying rattle when you started up which then went away at higher rpm. Had blown out an internal baffle, but you couldn't see anything from outside.

May be worth a look ??
 

Latest posts

Forum statistics

Threads
48,413
Posts
1,066,764
Members
42,792
Latest member
WyldTinker
Top