GMC-IH

[dragstews]

Hope the Pod don't look too hokey ??

You must be registered for see images attach

Was going to build a custom full console, but still wanted it to look like a old truck .. Thought that the console was not the look I was after ..

You must be registered for see images attach

You must be registered for see images attach

 

[dragstews]

You must be registered for see images attach

Made up the weld-in crack spacer ..
Looks to fit the need ..

Started in on installing the power cowl vent motor ..

You must be registered for see images attach

Wasn't intending doing power on the cowl vent ..
After I made up the A/C Pod and did a test fit seen a problem ..
The Pod was in the way of working the factory cowl vent handle ..
Could have made it work by making up a S handle to replace the stock one, but that may of been somewhat off the wall and looked funky ..

Watson's Streetworks ( www.watsons-streetworks.com ) had the cure ..

Most likely with having A/C on line the cowl vent won't be seeing much action ..
Since the keyless door locks remote fob has a few unused channels, could hook the vent up to work by remote control ..

.. That would freak-out some folks !! Lol

Been giving some thought on the new aftermarket wiring harness ..
Bought this critter a while back for running the wires though the firewall ..

You must be registered for see images attach

After some more thought went down, it's not going to work for me ..
The truck is going to have a world of wires going though the wall ..
There's the common wires for the motor and all the lights, this would work well for them ..
But, I have the wires for the trans stand-alone controller and trailer electric brakes plus a few others that will be seeing the wall ...

New game plan is in the works ..

This one should allow room for all the wires ..

You must be registered for see images attach

 

[dragstews]

This just might turn out looking dang nice .. ??

You must be registered for see images attach

I gave the vent a slight tilt ..
More cracks to be filled ..

Eek ... (Maybe I should rephrase that ?)

Done with the cracks ..
Left a rolled edge where the Pod meets up with the dash ..
Thinking that would be a better look than butt to butt ..

You must be registered for see images attach

You must be registered for see images attach

Cool ... I'm digging it ..

 

[dragstews]

What does this switch do ...

You must be registered for see images attach

(Been so long ago I forgot)

 

[DoubleDingo]

What does this switch do ...

You must be registered for see images attach

(Been so long ago I forgot)

Left, Center, Right?

 

[Craig Nedrow]

That looks like it should be in a cars movie,

 

[brooksman9]

Or a dice game…

 

[dragstews]

That looks like it should be in a cars movie,

You must be registered for see images attach

That would spook me ... Eek

 

[dragstews]

xc_hide_links_from_guests_guests_error_hide_media

Dang, that wrecker looks familiar !!

You must be registered for see images attach

The gig with the truck in the above photo ..
(S-Series)

My truck is a R-Series .. L-Series was the first of the Comfort Vision Cabs ..Made from 1950 to 52, then came the R's in 53 production ran to 55 with those bad boys .. Same cab as the L's then in 56 the S Series (Same cab as the L's and R's) Interesting bout the R Series tucks.. IH built them into the late 60's in the Heavy Duty version ..

xc_hide_links_from_guests_guests_error_hide_media

Tidbit of useless information :
The dash that is going in my 54 R-100 Light Duty truck came out of a 1967 R-190 over the road truck ...

 

[dragstews]

Well POO !

You must be registered for see images attach

Thought I was ready for the base coat ...
Nope, after the shoot found a few boggers that I missed in my prep work .. Bummer, got to re-shoot the critter .
( Think I might try out a stronger pair of glasses on the next coat )

Oh-well ...
That's all part of the journey ..

You must be registered for see images attach

Hoping I'm a better artist than a bodyman .. Lol

 

[dragstews]

A preview of how it's going to be looking ...

You must be registered for see images attach

You must be registered for see images attach

Anybody got a 3-3/8" VDO Series 1 gauge to sell ..
Don't matter if it works or not, I need only the chrome bezel ..
I have a old console manifold vacuum gauge from a early 60's Pontiac LeMans ...

You must be registered for see images attach

The bezel that's on it is not a match to the VDO (333355) tach, since I'm into reworking the dash sure would be good timing to make it look like it belongs ..

Really don't need it to tell me when I got my foot in it, got that down pretty good, but it fills the hole in the dash quite nicely ..
___________________________________

Found one ... Did a trade, three for one ..

You must be registered for see images attach

It's a tach just like the one I already have .. He said that it's NOS never used ...