Filler neck components

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dandersen

Junior Member
Joined
Nov 1, 2022
Posts
2
Reaction score
1
Location
Indiana
First Name
Dane
Truck Year
78, 79, 84
Truck Model
c10
Engine Size
350
I have a 83 or 84 bed, and I have a 78 frame and fuel tank. Which filler neck would I need? 73-78 or 79-89
 

dandersen

Junior Member
Joined
Nov 1, 2022
Posts
2
Reaction score
1
Location
Indiana
First Name
Dane
Truck Year
78, 79, 84
Truck Model
c10
Engine Size
350
The round headlights didn't have fuel doors? I thought they didn't but I wasn't sure.
 

Dixie Pride

Junior Member
Joined
Jan 26, 2023
Posts
16
Reaction score
16
Location
Southern MD.
First Name
Al
Truck Year
1985
Truck Model
K20
Engine Size
350
Just finished a bed off restro on my 85 K20 i have had since new. When i replaced the gas tanks and filler hoses i could not find the both pieces online from say LMC trucks. I ordered Stainless Steel bent piping and made my own. They will never rust out again.Fit good too.Dont forget the ID and OD if you go this route. Hope this helps
 

94_6SpeedZ

Junior Member
Joined
Nov 30, 2021
Posts
5
Reaction score
4
Location
Brighton MI
First Name
Greg
Truck Year
1976
Truck Model
C10
Engine Size
350
I just went through this puzzle a year ago....

I have a 76 (16 GAL tank) and a newer bed with a fuel door. (Not sure what year bed as the truck was in pieces when I got it). The filler opening on the bed will tell you if it's a 79-83 or 84-87. LMC catalog is helpful with pictures. I have a 79-83 bed. The size of the filler hose also changed in those years. 73-81 had a smaller size than 82-87.

So, similar to your situation. I needed a fuel filler pipe for a 79-83 and a fuel filler hose for a 79-81. That would be correct if you have the 79-83 bed. If it's an 84-87 bed, you may have to adapt from the smaller diameter fill hose to fit the larger size filler pipe.
 
Last edited:

matt4426

Full Access Member
Joined
Dec 28, 2021
Posts
64
Reaction score
100
Location
NE Ohio
First Name
Matt
Truck Year
79
Truck Model
K35
Engine Size
454
You need the correct filler neck and brackets/hardware for what ever year bed you have. I would get an 80's style fuel tank with the larger fuel fill port to got along with the 84 filler neck. As previously noted above, LMC has nice pictures of the different filler necks and bed brackets/hardware
 

Toby

Junior Member
Joined
Jun 13, 2021
Posts
20
Reaction score
31
Location
Lompoc ca
First Name
Toby
Truck Year
1973
Truck Model
C10
Engine Size
350
Definitely going to need the filler components for the bed. I have a 73 with a 81-82 bed and it took me a few tries to figure it out. I had to get the fuel filler neck that went with the bed not the actual year of the my truck.
 
Last edited:

Dleslie212

Full Access Member
Joined
Sep 2, 2019
Posts
202
Reaction score
122
Location
Phoenix
First Name
Dustin
Truck Year
1977
Truck Model
K10
Engine Size
5.7L 350
I have a 77 (supposedly). I have a fuel door on driver's side, but just the gas cap on the passenger, no recessed fuel door.

I ordered the 77 fuel necks and hoses from LMC when I replaced both my tanks. The passenger worked perfectly - the driver side I had to cut in half and extend with a piece of pipe and hose clamps, and it doesn't have enough pitch - I have to fill with the nozzle slowly or it clicks itself off
 

Latest posts

Forum statistics

Threads
41,854
Posts
903,566
Members
33,367
Latest member
texdave
Top