Cutting a hole....

[eskimomann209]

For the dual tank switch. I’m nervous about this one. Does anyone have a measurement of the opening?
Im plumbing in the selector valve and all that good stuff. But I’ve been procrastinating due to this hole. I’m even pondering just tucking the switch under the dash

 

[bucket]

Which style switch do you have?

 

[eskimomann209]

Which style switch do you have?

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Doppleganger]

I can trace the dash hole - scan it in actual dimensions and email / PM it to you (tomorrow). Would give you an exact templet. ?! Mine's an 85 - so no idea if its different or not.

 

[eskimomann209]

I can trace the dash hole - scan it in actual dimensions and email / PM it to you (tomorrow). Would give you an exact templet. ?! Mine's an 85 - so no idea if its different or not.

Oh man. I would appreciate that!

 

[Ricko1966]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Your gonna have to turn the truck over to use that switch.

 

[eskimomann209]

Hahaha. Yeah I noticed after I posted them. Lmfao.

 

[Doppleganger]

If you need these emailed to you, just say. They're scanned at actual size but not sure if anything changes by posting them here.

You must be registered for see images attach

You must be registered for see images attach

 

[eskimomann209]

If you need these emailed to you, just say. They're scanned at actual size but not sure if anything changes by posting them here.

You must be registered for see images attach

You must be registered for see images attach

Thank you very much.

 

[Doppleganger]

Location location location! Should have included this with the drawing.

You must be registered for see images attach

You must be registered for see images attach

 

[eskimomann209]

Thank you very much. I’m going to get some fresh wheels for the dremel and get to it. I also need to extend the wiring for the switch. It don’t make it to the factory location. I drilled the hole through the firewall too far away.

 

[Doppleganger]

I drilled the hole through the firewall too far away.

Hate it when that happens.

My truck is getting gutted - all the wiring is butchered and hacked. I went to pull the switch and it came apart in my hand....lol. Going FI so the switch is different and had to go anyways.