Gman73
Full Access Member
- Joined
- Aug 19, 2021
- Posts
- 101
- Reaction score
- 28
- Location
- Sacramento
- First Name
- Gary
- Truck Year
- 1973
- Truck Model
- Ck20
- Engine Size
- 350 v8
In my rebuild I replaced the pressure plate throw out bearing clutch disk etc, new springs and all the linkage is fine. Works properly, however when I push the clutch pedal in it seems to engage and depress at the right level, but when it comes back up from the floor it doesn't return fully. I can pull it back up by hand what seems to be about 2.5 inches of travel till it hits its bump stop. Any Ideas?
Thanks
Thanks