lowblackc10
Junior Member
- Joined
- Jan 19, 2014
- Posts
- 10
- Reaction score
- 12
- Location
- central NY
- First Name
- jerry
- Truck Year
- 1984
- Truck Model
- C10
- Engine Size
- 305/th350 now - 350/m21 soon
Hi all, I have an 84 c10 that I got shortly after sitting in a barn for ten years. So I replaced most of my brake lines including the front rubber ones as well as rotors, pads, calipers, master cylinder, wheel cylinders, shoes and drums. My issue is that my driver side front brake seems to be holding at times, not really noticeable on the road but it gets alot of brake dust built up on just that wheel. It also has 3 inch belltech drop spindles and 2 inch drop springs, with the heavier brake setup. Has anybody had anything like this happen? Any advice is appreciated, thanks in advance.
