Another door cylinder lock question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

geauxnow

Member
Joined
Mar 5, 2024
Posts
34
Reaction score
9
Location
DFW
First Name
Matt
Truck Year
1989
Truck Model
V1500 Chev Suburban
Engine Size
350
I posted this in electrical but it probably belongs here:
On this 89 v1500, the rear driver and passenger electric door locks and rear barn door electric lock was weak, sometimes locking, and mostly not. I replaced the barn door lock cylinder to no avail. That may need more 12v troubleshooting because it does nothing. But the driver rear, it would successfully lock and unlock most times. I replaced that cylinder and it never electrically locked again. Replaced that new cylinder w another new cylinder w same disappointing result. The plunger works well when not attached to linkage. Linkage isnt binding. Why so weak?
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
10,643
Reaction score
25,408
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
Likely, any old grease in the latch mechanism has it fouled up. I'd remove it, soak it in some gasoline then spray a little white lithium on the moving joints. Couldn't hurt unless you're smoking around the gas.
 

Bennyt

Full Access Member
Joined
May 17, 2019
Posts
1,643
Reaction score
3,008
Location
Surprise
First Name
Ben
Truck Year
1977
Truck Model
C10
Engine Size
350
Likely, any old grease in the latch mechanism has it fouled up. I'd remove it, soak it in some gasoline then spray a little white lithium on the moving joints. Couldn't hurt unless you're smoking around the gas.
Cigarettes don't burn hot enough to light gas so technically you could smoke as long as you don't strike a match or use a lighter.
 
  • Like
Reactions: WFO

Rickf

Full Access Member
Joined
Jul 29, 2017
Posts
658
Reaction score
866
Location
Grafton NH
First Name
Rick
Truck Year
1974, 1954 & a 1937
Truck Model
K20
Engine Size
350
And remember it's the gas vapors that ignite, not the liquid.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
10,170
Reaction score
19,659
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
Cigarettes don't burn hot enough to light gas so technically you could smoke as long as you don't strike a match or use a lighter.
Don't know about gasoline buy I've seen Lacquer thinner set off by a cigerette.
 

Bennyt

Full Access Member
Joined
May 17, 2019
Posts
1,643
Reaction score
3,008
Location
Surprise
First Name
Ben
Truck Year
1977
Truck Model
C10
Engine Size
350
I totally derailed this thread already so I'll keep it going. My grandfather in the 50-60's worked for a gas company in Texas. My dad said he would climb inside the tanks still with gas/ oil to weld and do repairs while smoking. Never had an issue but died in his early 60's from heart disease. Steak and eggs cooked in lard for breakfast and cigarettes. He was well known for being strict and using an extra long belt for spanking. As the oldest male grandchild, I was the last person to be spanked by him before he died. I was 5 or 6 when he passed.
 

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,166
Members
43,334
Latest member
Nborden88
Top