89 V1500 Silverado Burb ?!?!?!

[HotRodPC]

I'm thinking of taking a look at this roller. Has Trans and Transfer Case. Engine been pulled but can go with it. Has tossed a rod.

Not sure I can swing this. It's not 3/4 ton and doesn't have tailgate but I do have 3/4 ton axles that were to be used on the K10/K20 project I can use.

So where is @RetroC10Sport ??? I can look up all these codes one at a time, but I think you have a way to post the list with descriptions Don't you?

You must be registered for see images attach

 

[1987 GMC Jimmy]

This is the directory I use. None of them seem too perfect, but this one's extremely comprehensive. You can plug the codes into the binoculars at the top of the page and kill that sticker in a few minutes.

https://www.marshu.com/images-websi...codes/gm-firebird-camaro-GM-RPO-car-codes.pdf

 

[Honky Kong jr]

Oh yeah I’ll take the front axle shafts off your hands if you get it and axle swap it. It has 3.73s

 

[HotRodPC]

This is the directory I use. None of them seem too perfect, but this one's extremely comprehensive. You can plug the codes into the binoculars at the top of the page and kill that sticker in a few minutes.

https://www.marshu.com/images-websi...codes/gm-firebird-camaro-GM-RPO-car-codes.pdf

I'm aware of those lists. I have a few too. But I like how @RetroC10Sport put the list out there with just the options it has and a description next to them. So much easier to look over.

 

[HotRodPC]

Oh yeah I’ll take the front axle shafts off your hands if you get it and axle swap it. It has 3.73s

Yep, they should be 30 spline and they are 3.73's. If I get this thing though, since I've already sold the rear axle and installed a 14 bolt, and have a 3.08 front axles in the K10/K20. So be able to sell the K10 as a roller, I'd probably have to swap these 10 bolts into the K10 to be able to keep my 3/4 ton axles. If I can swing this, it's only if I'm able to sell the K10. This Burb just needs an engine put in it. I'd probably just put an engine in it, get it running and registered and drive it for awhile until I'm able to swap in all the power train, and lift and 3/4 ton rear springs I'd want in it. What would be real cool, is if I could sell the 84 C20 as a roller and get to keep the 454 that's in real good shape and put that in the Burb, sell the 84 C20 roller, my 3/4 ton C20 frame, and that 85 C20 rust free cab. If I got the right money out of all of that, then I could keep the K10/20 too. I'm almost afraid to post pics of it and someone go search it out and snag it up before I got **** right to get it myself.

 

[Honky Kong jr]

Yep, they should be 30 spline and they are 3.73's. If I get this thing though, since I've already sold the rear axle and installed a 14 bolt, and have a 3.08 front axles in the K10/K20. So be able to sell the K10 as a roller, I'd probably have to swap these 10 bolts into the K10 to be able to keep my 3/4 ton axles. If I can swing this, it's only if I'm able to sell the K10. This Burb just needs an engine put in it. I'd probably just put an engine in it, get it running and registered and drive it for awhile until I'm able to swap in all the power train, and lift and 3/4 ton rear springs I'd want in it. What would be real cool, is if I could sell the 84 C20 as a roller and get to keep the 454 that's in real good shape and put that in the Burb, sell the 84 C20 roller, my 3/4 ton C20 frame, and that 85 C20 rust free cab. If I got the right money out of all of that, then I could keep the K10/20 too. I'm almost afraid to post pics of it and someone go search it out and snag it up before I got **** right to get it myself.

I hear ya only way 2 people can keep a secret if one kills the other lol

 

[HotRodPC]

AA3 : WINDOW, TINTED, DEEP TINT, ALL EXCEPT W/S, F.D.,
AK9 : RESTRAINT SYSTEM, RR SEAT, SHLDR, RETR, 3 POINT
AS3 : SEAT, RR, SUBURBAN
AT5 : SEAT RR, CTR, FLDG
AU3 : LOCK CONTROL, SIDE DR, ELEC
A31 : WINDOW, POWER OPERATED, ALL DOORS
A95 : SEAT, FRT BUCKET, HIGH BACK, PASS & DRIVER RECL
BC3 : ORNAMENTATION, INTR, I/P, DELUXE
B30 : COVERING, FLOOR CARPET
B32 : COVERING, FRT FLOOR MATS AUX
B33 : COVERING, REAR FLOOR MATS AUX
B85 : ORNAMENTATION, EXTR MLDG BELT REVEAL
B96 : MOLDING WHL OPENING
CD4 : WIPER SYSTEM WINDSHIELD, PULSE
CMD : PLANT CODE, FLINT MI
C5W : GVW RATING, 7000 LBS
C60 : HVAC SYSTEM, AIR CONDITIONER FRT MAN CONTROLS
C69 : HVAC SYSTEM, RR, AIR CONDITIONER
DK6 : CONSOLE ROOF, INTERIOR
D1G : GEAR, SPEEDO DRIVEN
D45 : MIRROR O/S, SST
E5Z : SPEEDOMETER ADAPTER (DELETE)
E6C
E9Z : SPEEDOMETER KEY (DELETE)
GT4 : AXLE REAR, 3.73 RATIO (DUP WITH 5 X 1)
JB5 : BRAKE, POWER, DISC/DRUM, 6400 LBS
KC4 : COOLING SYSTEM, HEAVY DUTY ENGINE OIL
K34 : CRUISE CONTROL, AUT0MATIC, ELECTRONIC
K68 : GENERATOR,105 AMP
L05 : ENGINE, GAS, B CYL, 5.7L, 1 TBI, V8
MD8 - 700r4 transmission 4 speed auto
MX0 - auto overdrive provisions
NB2 : EMISSION SYSTEM , CALIFORNIA , TIER O
NE2 - 40 gallon tank
NK3 - sport steering wheel
N33 - tilt wheel
N90 : WHEEL, 15 X 7,ALUMINUM CAST, 4.75 INCH BOLT CIRCLE
SLM - Stock order sale
TR9 - Lamp group
TT4 - Halogen headlamps -4
T63 - headlamps on alarm
UA1 - High capacity battery
UM6 - AM/FM radio, seek/scan/ auto-rev cassette
UM6 - AM/FM radio, seek/scan/ auto-rev cassette
UN9 - radio equipment - suppression
UP8 - AM/FM radio provisions
U73 - fixed radio antenna
VE5 - frt/rr impact bumper chrome
VG3 - frt bumper impact strip
VG5 - gas tank protector
V02 - HD radiator w/ oil cooler
V22 - chrome grille
V73 - vehicle statement usa/canada
XHA TIRE SIZE?!?!?! >>>>>>>>>>>>>>>>
X6Z - auto locking hub
YA7
YD3 - base axle
YD5 - base frt spring
YD6 - base rr spring
YE9 - comfort/conv package #3
YF5 : CERTIFICATION, EMISSION, CALIFORNIA
YG3 - Deluxe package, bright marker/taillight trim
YHA TIRE SIZE !?!?!? >>>>>>>>>>>>>>>>>>>
ZHA TIRE SIZE !?!?!? >>>>>>>>>>>>>>>>>>>
ZQ2 - driver convenience sales package
ZW9- base body equipment
ZY1 : COLOR COMBINATION, SOLID
Z75
24D : TRIM COMBINATION, CLOTH, DK BLUE (D) (91)
241 : SECONDARY COLOR, EXTERIOR, BLUE METALLIC (93-SAT)
27U : PRIMARY COLOR, EXTERIOR, LT FRENCH BLUE MET (91)





I got it started... Will edit and update later, or hoping @RetroC10Sport can get his list. Can you populate a RPO list with just a VIN # on an 85 Retro???

 

[Honky Kong jr]

That has the small bolt pattern?

 

[RetroC10Sport]

I got it started... Will edit and update later, or hoping @RetroC10Sport can get his list. Can you populate a RPO list with just a VIN # on an 85 Retro???

Only if it had been sold in Canada.

 

[HotRodPC]

That has the small bolt pattern?

You mean on the wheels? I much doubt it. Those codes were taken from a generic list so they are subject to mean different **** from different years and different body styles. In this case, probably just mean cast aluminum wheels.

 

[Honky Kong jr]

You mean on the wheels? I much doubt it. Those codes were taken from a generic list so they are subject to mean different **** from different years and different body styles. In this case, probably just mean cast aluminum wheels.

Oh I thought they were specific to that vehicle.

 

[HotRodPC]

Oh I thought they were specific to that vehicle.

The codes are specific to vehicles, but I'm using a generic GM list not just a 89 Chevrolet Truck Codes list so there are very minor variances in the descriptions. Like most of think G80 is always a Gov-Lok aka Gov Bomb. Not true. @89Suburban had a G80 code on his Burb and it was an Auburn unit IIRC.

 

[HotRodPC]

I wish I could make this work but unless I'm able to sell some of my parts first, I just can't risk it. I wish someone needed a rust free cab or rust free C20 frame. If had 1/2 ton axles to put back in my K10, I'd sell that to get this Burb. It's not exactly what I want, but it's closer to what I want than my K10/20 so I'd be willing to give up that project to have this one and put all that labor into something I'd rather have instead of into the K10/20. Ideally, I'd prefer to sell my C20 as a roller so I could keep the 454 for this Burb.

I'll just keep wishing for this wishing for that. Maybe it'll happen.

 

[Honky Kong jr]

Gotta be your own genie sometimes man.

 

[HotRodPC]

I bet if I were a bit close to Cali, I could get a fair price outta my K10. It's originally a 6.2 so it's forever exempt from Smog Inspection in all counties.