74131 Super Ram Fuel Injection System

[hizen]

I got one of these systems on trade form a guy and it didn't come with any paperwork. Probably a long shot but does anyone have or know of where I can get the paper work? I left a message with ACCEL today.

 

[bucket]

Try looking around on thirdgen.org for some info. That setup has been discontinued for quite some time.

 

[hizen]

Finally got an email back from ACCEL with the instructions in a PDF file.





If anyone ever needs a copy PM me on here. Too large of a file to upload to here.

 

[bucket]

Wow, that's pretty cool! What do you plan to use it on?

 

[hizen]

Wow, that's pretty cool! What do you plan to use it on?

Going in this.

79 K-10 SBC 350, Turbo 350 trans, NP 205 T case.

Need to pull the headers (already has tube headers on it) and weld in the O2 bung.

You must be registered for see images

You must be registered for see images attach

 

[Jims86]

Nice setup!
Make sure you go with a heated O2 sensor with those headers.
What gear ratio are you running?

 

[HotRodPC]

Sweet !!!

 

[89Suburban]

That's awesome. Retro may be able to add that file it to his server to host here.

 

[hizen]

Nice setup!
Make sure you go with a heated O2 sensor with those headers.
What gear ratio are you running?

Thanks.

4.10s are in it right now, waiting to do gears till I decide on the trans I am going to go with, got a T350 but its starting to develop a slight slip, debating on rebuilding it or going T400. Its required to be heated with the kit also. Did a dry run last night, got all my bolts marked as to where they go and picked up new bolts for the top cover plate.

That's awesome. Retro may be able to add that file it to his server to host here.

If he would like to have him PM me on here so I can e mail him a copy.

 

[Jims86]

Thanks.

4.10s are in it right now, waiting to do gears till I decide on the trans I am going to go with, got a T350 but its starting to develop a slight slip, debating on rebuilding it or going T400. Its required to be heated with the kit also. Did a dry run last night, got all my bolts marked as to where they go and picked up new bolts for the top cover plate.




If he would like to have him PM me on here so I can e mail him a copy.

4.10 may be just right. Ram setups are usually for mid to high RPM use, not good for a truck if geared high.

 

[hizen]

4.10 may be just right. Ram setups are usually for mid to high RPM use, not good for a truck if geared high.

Will keep that in mind thanks for the tip.

Also it's for sale now. Had some stuff come up and may have to be moving out of state for work.

 

[d1buggy]

I have a 74131 accel system on my corvette. I would like a copy of the instructions or what ever you have for it. Thanks