1986 cold start issue 305

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

kentrx1

Junior Member
Joined
Jun 21, 2023
Posts
4
Reaction score
2
Location
north carolina
First Name
kent
Truck Year
1986
Truck Model
c10
Engine Size
305
Been working on 1986 truck with 305. Have replaced fuel pump, carburetor, and plugs. Runs perfect once it starts. If it sits for a few days/weeks have to poor lots of fuel in carb before it will finally stay running. Once cranked will crank fine all day. Suggestions on what I check next?
 
Joined
May 29, 2023
Posts
31
Reaction score
34
Location
Minnesota
First Name
Brian
Truck Year
1980/1984 Frankenstein
Truck Model
K10 Silverado
Engine Size
305
I have the same motor with the same type of issue. I as well changed lots of things and nothing made it better. So far my best guess is the engine being old takes time to build enough pressure to start. I do not have to poor anything into mine. It just takes like 10 seconds before it starts and its a really rough start too. It will die right away if I do not keep the rpms up. However, once it gets to a stable idle, it starts fine the rest of the day just like you said.
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
1,629
Reaction score
2,207
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Carb likely dry, It is common for fuel to evaporate when not driven. However, cranking for a few seconds should provide enough fuel to start. Q jets also have well plugs that can leak. If excessive cranking or priming is required would suspect a fuel delivery problem. Check both fuel pressure and volume. Have seen even new fuel pumps that are defective.

Make sure the choke plate is closing.
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,463
Reaction score
4,577
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,70,48
Truck Model
Suburban k10, bonanza k10, c30 C&C, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350
I would make sure the choke is operating correctly first. Ive found if mine sit for 3-4 days or more they lose prime and fuel evaps out of the carb.
 

Latest posts

Forum statistics

Threads
42,136
Posts
909,934
Members
33,636
Latest member
ehef
Top