063 heads on tbi WHAT SAY YOU ??

[roy c]

I have a set of 063 vortec heads that I'm considering to put on my 350 tbi rebuild I also have the gm. intake I was wondering if its worth it or shouldn't even bother. also is there any other things I have to do.
thanks to all Roy

 

[Swims350]

is it gonna be carb or tbi?

vortec heads give more power over any other stocker right off so they are good and worth it, but for tbi might need a chip burnt not sure.

 

[roy c]

its a tbi motor

 

[Swims350]

yes I know it's a tbi motor just wondered if you were going to keep it tbi or make it a vortec head carb motor.

I've seen a lot of uys do the vortec intake tbi setup or even vortec carb intake with a tbi adapter plate and make it work but some have used big block tb's or injectors and what not and some used a chip or all can't remember, but any other plans like bigger cam? egr system?

 

[Driver4r]

What did 063's come on? Ive only heard of 906/062/and some 305 head.

 

[roy c]

I was only going to change the heads and intake was wondering if it was durable keep the rest the same

 

[junkyardog05]

Vortec heads have a different bolt pattern than non vortec heads.

Vortec heads have 4 bolts in each head 2 in front and 2 in the rear 0 in the middle.

Non-Vortec heads have 6 bolts in each head 2 in the front, 2 in the middle and 2 in the rear.