Search results

  1. J

    Pull to the right?

    just had this issue! i replaced hoses/calipers/pads i am just learning so i will write exactly what the explanation from mech shop had on invoice: front rotors checked out fine. fluid to rear axle seals leaking. removed axle and changed spider gears and true axle seals. changed both brake...
  2. J

    85 Pulls to Right Brake Overhaul

    thank you all for replies. it's at a shop right now getting a thorough walkthrough. turns out the mechanic before the current one didn't actually go through everything. the brakes did not check out! there was a leak in the left rear. as well, one of my gears in the rear axle is pretty...
  3. J

    85 Pulls to Right Brake Overhaul

    prop valve well here's a quick update: new calipers and hoses and the front is still pulling to the right. i'm thinking it's the prop valve? has anyone experienced a failed prop valve or do i just need to reset it? if i need to reset it how do i go about doing that? here is the photo...
  4. J

    85 Pulls to Right Brake Overhaul

    ok, so i've decided to replace all brake hoses/pads/calipers and bleed the brakes. hopefully this will solve the issue and prevent me from having to replace the drums! thanks for all the advice.
  5. J

    85 Pulls to Right Brake Overhaul

    i live in louisiana where there are no hills! i'll honestly never need one.
  6. J

    85 Pulls to Right Brake Overhaul

    thanks for advice. i know this has been discussed in other threads it's just hard as a newbie to all things mechanical and chevy's to understand sometimes. i believe i'm just going to do an entire overhaul. these brakes have gotten in my head! i can just see an 18 wheeler braking hard in...
  7. J

    85 Pulls to Right Brake Overhaul

    So my 1985 K10 pulls pretty bad at 15mph+ when applying brakes lightly or hard. I had a mechanic go through everything this weekend. Brake pads are pretty much brand new/hoses/etc. The calipers are pretty new & he says he can replace them if I want but it may still pull after replacement...
  8. J

    antenna extender?

    all set...finally! thanks for advice. i used this antenna extension cord to fit aftermarket antenna cord from po to my digital radio Metra 44-EC18 18-Inch Antenna Extension Cable
  9. J

    antenna extender?

    sorry, for some reason i didn't see your replies. thank you for responses. turns out i ordered an extender recommended by crutchfield (where i ordered my radio from) the extension cord female end doesn't fit the male end of the cord that is already in there. talk about a bummer! it seems the...
  10. J

    Newbie Transfer Case Identification Help

    nice. thanks. i'll look into that in the future. i just picked this truck up from a po and it needs a good bit of tlc so i have to prioritize for sure. a good test in patience.
  11. J

    Newbie Transfer Case Identification Help

    the one i found in chicago was hot tanked with a new seal and bushing included. thanks for advice though.
  12. J

    Newbie Transfer Case Identification Help

    appreciate it. sadly, i purchased one already. i'm not mechanical at all but learning. could you explain what the benefit of changing it to a fixed yoke would be? i'm not even sure what it does. thanks!
  13. J

    What have you done to your square lately??

    replaced both gas tanks and sending units as both tanks were leaking. switch still doesn't work going to replace it next.
  14. J

    Newbie Transfer Case Identification Help

    thank you all for your help. i finally found an extension housing in chicago.
  15. J

    Exhaust Help...What to do?

    so if i were to run pipes from both of those mufflers out the back (or dumb to sides) that would be considered true duals? any benefit to losing one muffler and going with a single?
  16. J

    Exhaust Help...What to do?

    Hi all, I really don't know much about exhaust and how it affects performance vs sound etc... As of now I have a 85 K10 swb with 350 and 2 mufflers (not sure which ones) from previous owner. No pipes just the mufflers. I didn't realize all that exhaust entails...
  17. J

    Newbie Transfer Case Identification Help

    thanks for heads up. can i use the tail housing from a ford by any chance? i am not seeing anywhere to buy one online. i guess because i am new, i can't post in the wanted section. any help figuring out why or how to fix this would be appreciated!
  18. J

    Newbie Transfer Case Identification Help

    is it really dangerous to drive with it that way? the truck hasn't moved in a week due to waiting on new gas tanks to arrive. i looked all over the internet and couldn't find one! np website had them but they are all sold out.
  19. J

    Newbie Transfer Case Identification Help

    ok, so does this mean i need to come to a complete stop, put in neutral, and then shift gears? some buddies of mine were teaching me that i should be rolling around 5mph when i shift gears?
  20. J

    Newbie Transfer Case Identification Help

    yes, i'm so technical lol! thank you for that information. seriously, i know close to zero! but these forums are amazing and you guys are all so helpful. i really appreciate the knowledge and tips.
  21. J

    Newbie Transfer Case Identification Help

    THANK YOU. is that a good one to have? i will try and search for tail housing part as i fear there is a crack. i will absolutely try to find those numbers tomorrow and post photos. thanks again!
  22. J

    Newbie Transfer Case Identification Help

    I meant to ask for help identifying transmission as well!
  23. J

    Newbie Transfer Case Identification Help

    Hi All, Bought a 1985 Chevy K10 swb with 350 (supposedly) Can't really trust the previous owner I am finding out. I am not at all mechanical and know very little about cars/trucks but I am learning! I could use your help identifying which transfer case I have. I took a few photos that I...
  24. J

    1st Square Rust Help!

    thank you all for your advice. i will go with por15. what kind of insulation do you guys use?
  25. J

    Pulling to the right when braking

    interesting. thanks for the update! i'm afraid i'm in for a little trial and error.

Latest posts

Forum statistics

Threads
42,322
Posts
913,649
Members
33,821
Latest member
78ALB
Top