Search results

  1. Linville33

    Sm465 question

    So the kit came with a bearing and a bushing then and I assumed correctly? Sent from my SM-G920R4 using Tapatalk
  2. Linville33

    Sm465 question

    Forgot to update everyone on it. It's a 465 with a np208. And everything to swap. I'm doing it this weekend. Got a flywheel for the 400 and an 11 in clutch kit. Flywheel called for it. Two questions. Since it's a 208 my rear driveshaft is heavier any benefit or running the lighter one? Also...
  3. Linville33

    Sm465 question

    So I was going to go get a rebuilt trans this last weekend and decided to procrastinate a little longer and a steal came up on my local Facebook. I got an sm465, pedals, transfer case (looks like 205 in the pictures) and driveshafts all for.............. 100 bucks. Best deal I have found :)...
  4. Linville33

    Sm465 question

    Well my 700r4 took a shit today so now I'm kinda stuck. I can get a sm465 with 205 for 250 bucks on Craig's list. What conversion u join will I need? Also do I need to Change tranny humps or can I modify my automatic on to work with the stick? Sent from my SCH-R530U using Tapatalk
  5. Linville33

    Sm465 question

    Do you have the linkage yet or no? Sent from my SCH-R530U using Tapatalk
  6. Linville33

    Sm465 question

    Is that setup for hydraulic or linkage? Sent from my SCH-R530U using Tapatalk
  7. Linville33

    Dana 44 question

    Perfect then been throwing around the idea of a big lift big rubber combo Sent from my SCH-R530U using Tapatalk
  8. Linville33

    Dana 44 question

    Thanks man, good to know it will do what I need it to do. What's special about the big hub and flat top spindle? Sent from my SCH-R530U using Tapatalk
  9. Linville33

    Sm465 question

    700r4 and 208. I don't mind it just like to drive a stick more Sent from my SCH-R530U using Tapatalk
  10. Linville33

    Sm465 question

    What years SM465 can I swap right into my truck? 83 K20 small block 400 unknown year. I would need the clutch pedal assembly and linkage/master cylinder. There are two on CL right now one says Hydraulic bellhousing for 88-98 IFS trucks (Didn't they switch to driver side drop in 88?) and the...
  11. Linville33

    Dana 44 question

    Ok guys found what appears to be a really good deal. Guy is selling a set of 3/4 ton axles for 500 bucks. Says they are rare factory axles because of the 4.56 gearing in them. Now I know the 14 Bff is the best and that's what the rear is. My question is the "Big Hub flat top knuckle Dana 44" any...
  12. Linville33

    Tool Question- what are these?

    Pilot bearing removal tool? Thought that's what mine looks like although can't find it at the moment Sent from my SCH-R530U using Tapatalk
  13. Linville33

    Speedo replacement.

    Well since I broke mine trying to replace the lights behind it, I got a replacement. My question is do I have to pull the whole cluster or is there a way I can get the speedo assembly swapped without pulling it all out? Sent from my SCH-R530U using Tapatalk
  14. Linville33

    Quadrajet Rebuild

    Alright thanks guys I think I can handle rebuilding it. Key word there being think. My buddy's dad has rebuilt them in the past I think ill have him help me on it as well Sent from my SCH-R530U using Tapatalk
  15. Linville33

    Quadrajet Rebuild

    My buddy has a book on how to rebuild them I just don't know anything about carbs Sent from my SCH-R530U using Tapatalk
  16. Linville33

    Quadrajet Rebuild

    I recently bought an 83 Scotsdale and need to get it running again. Was gonna pull motor but need to get it up and running. It has a small block 400, quadrajet in it. Don't know anything about carbs. I need to know what rebuild kit I need to get to rebuild this carb. Sent from my SCH-R530U...
  17. Linville33

    i want to lift my 1987 chevy !!help!!

    Didn't claim he was rude. Just don't want this forum to turn into the other forums where everyone is just like Google it rather than giving them links to look at. Sent from my SCH-R530U using Tapatalk
  18. Linville33

    Newbie

    Welcome and don't be afraid to ask I came in here not knowing much about these trucks and now even after I asked all the dumb questions I have learned quite a bit about them Sent from my SCH-R530U using Tapatalk
  19. Linville33

    84 4x4 engine swap advice

    I had an 87 with a 350 and 700r4 208 setup and beat the shit out of it. Had over a 1500lbs in the bed and it didn't have a issue pulling it. Pulled a boat and numerous trailers with it. I would say as long as your not doing some real heavyweight trailer you should be good with that setup. Now I...
  20. Linville33

    5.3 with an sm465

    Wanna get rid of that sm465 if you go a different trans route? Sent from my SCH-R530U using Tapatalk
  21. Linville33

    i want to lift my 1987 chevy !!help!!

    ^instead of pushing him to use the resources provided to him at least give him a couple thread links to look at. 1987 how high are you planning to go? What are you gonna use the truck for? Daily/sunday driver or strictly off road? What's your end goal for the truck? Is it a R or a V( please...
  22. Linville33

    Tranny swap

    Don't know haven't acquired one yet. Was gonna get the pedals and go from there lol
  23. Linville33

    Harbor Freight Tool/Product Review

    Alright thanks. I'm picking it up tomorrow and didn't know if it was solid or not
  24. Linville33

    Tranny swap

    Don't know much but if you ever are looking to get rid of the 465 or clutch pedal assembly let me know :) been looking
  25. Linville33

    Harbor Freight Tool/Product Review

    The electric fly swatter also works great against people lol tried it a few times on the little brother. Anybody try their 1000lb engine stand?

Latest posts

Forum statistics

Threads
42,243
Posts
911,999
Members
33,746
Latest member
lepak
Top