Search results

  1. timbo350

    d.r.a.c module

    thanks those diagrams will come in handy
  2. timbo350

    d.r.a.c module

    hard pedal like booster would be goin bad it did it when it first started acting up then I had a used speed sensor that I put in everything was fine for awhile and now back to this
  3. timbo350

    d.r.a.c module

    I have A 91 fullsize blazer 350 tbi 700r4 tranny np 241 case the speedo started acting up along with the brakes so I switched out the speed sensor from one of my spares and everything was fine for about 2 weeks then it happened again so bought a new one didn't fix it my mechanic that I only go...
  4. timbo350

    brake light speedo problem

    I have a 91' fullsize blazer the other day the speedo wouldn't work and then the brake light came on in the dash at highway speeds the brakes would start pulsing when pressed and the speedo will just bounce every now and then if I shut the truck off and restart it brakes work fine until about 35...
  5. timbo350

    lmc headliner

    I have every thing from LMC for my interior the headliners are great and so is the seat reupholstery kit just lay the cover out in the sun for a couple hours
  6. timbo350

    custom a/c lines

    I have a 89' gmc 3500 dually square body that had factory a/c with a 350 i just put in a 454 and th400 out of a big ass 1-1/2 ton camper the 454 has a sanden 508 compressor on it does anyone on here know of a way to get custom lines or were to get parts to make custom lines so i can have a/c again
  7. timbo350

    Backup Monitor/Camera???

    get the peak brand one from discount auto parts i have it and it works great no more in and out of the truck and yes it works great at nite I have 2.5 percent tint on my windows which means I cant see crap at nite and this thing shows everything behind the truck
  8. timbo350

    Bench Seat Cover

    I just ordered a fitted one from summit racing for my truck its a saddleman saddle blanket cover with black centers I paid $140.00 for it but it should be nice!!
  9. timbo350

    What brand of stereo equipment do you like best?

    pioneer head units and Quantum amps and subs weve run them forever and have not blown anything yet
  10. timbo350

    cab marker light problems

    I have a 89' dually and the other nite when I turned on my headlights I noticed my roof marker lights not workin so today I did some testing of the circuits and found that im gettin power on both sides of each light plug with the bulb out and when I take out all of the bulbs but one and touch...
  11. timbo350

    Rough country ride.

    I run the cheap hydros on mine but I just put in polyurethane bushings im my shocks and that helped a lot these trucks ride like crap anyways so just hold on for the ride
  12. timbo350

    sm465 hydraulic clutch problems

    Im happy with my monster trans its in my blazer the original one had been rebuilt and then it took a crap so I went thru it and everything was completely worn out even the case had marks in it I got my 700r4 from monster delivered for 1,400 bucks with a converter I will definetely go to them...
  13. timbo350

    Goodmark door??

    Igot mine from lmc truck there better than rotten old ones but there stamped no were near the factory ones
  14. timbo350

    sm465 hydraulic clutch problems

    my next upgrade will be a built 4l80e from monster transmission with the tci comp controller I have a swamp buggy that im wantin to haul and that sm465 has to long a apuse between shifts
  15. timbo350

    gearig and a four speed

    this truck is all new it has a new 3 core radiator with the twin electric fan module from flexilite also theres a 14" flexilite fan in front of the radiator its just when i hook a trailer to it dont have the get up and go that i want im just wantin to see if any one has the setup that iwas...
  16. timbo350

    Would like to see 4" lift with 35s

    this is 4 inch suspension and 3 inch body lift with 35x14.50-16 tires
  17. timbo350

    B&M Unimatic shifter instal

    those elites are built strong ive had a bunch of problems with keepin the header bolts tite i bought them stage 8 locks and the seal for good aluminum header gaskets now i have now problems
  18. timbo350

    sm465 hydraulic clutch problems

    I went with hydro just do to bending the clutch rod and binding up all the time when the truck would tweak since doin the hydro ive not had a problem with puttin the truck in a bind as of rite now everything is good yesterday i pulled the pedal and components from another truck that i converted...
  19. timbo350

    gearig and a four speed

    Does anyone have a 3/4ton square body 4x4 truck runnin 4:10's with 35"tires and a sm465 four speed and if so how do you like it I currently have 3:73's with 35"s and A 4 speed with a mildly built 355 at 65 im runnin 2,300 rpms but cant pull a trailer without runnin hot normally my trailer with...
  20. timbo350

    B&M Unimatic shifter instal

    i just put that same shifter in my dually I swapped out my manual for a th400 those headers are those the hedman shorty elites
  21. timbo350

    sm465 hydraulic clutch problems

    the clutch and pressure plate are from center force the clutch is stage 2 which is new all of the clutch parts are ac delco and were brand new as of today I went and took the pedal and hydraulics from my dually and installed them in my truck the pedal is different about 3/4 inch so i made up a...
  22. timbo350

    UPS Brought Me Some Tires Today.

    they are good tires had them on a couple of my trucks
  23. timbo350

    08 Dually Bed?? What??

    ive seen 88-98 stepside beds on obs that look really good
  24. timbo350

    sm465 hydraulic clutch problems

    I have A 1989 obs dually with factory hyrdraulic clutch but the pedal isnt even close to fitting in my bracket even with modification can the pedal assembly from the 89 model be removed so i can put in in my 84
  25. timbo350

    sm465 hydraulic clutch problems

    I have a 84 k2o that has the sm465 manual and it had the mechanical clutch setup when i restored it i swapped in the hydraulic clutch setup every thing worked great but now my slave cylinder keeps leaking which in return means i have no clutch ive put in three slaves and every time I do this...

Latest posts

Forum statistics

Threads
42,191
Posts
911,020
Members
33,685
Latest member
rickybobby69
Top