Search results

  1. C

    Spare Tire Mount

    I have a 1984 Chevrolet K20 with 35" tires and it does not have a spare for it. What are some places and ideas to have a spare tire mount. I am pretty sure that a 35" tire will not fit under the bed. Anyone have some ideas?
  2. C

    6 x 9 Behind Seat

    I am looking at adding some 6 x 9 Speakers in the cab corners and was wondering the best way to mount them. I saw where a guy built some brackets for $65.00 but I can not seem to get a hold of him as when he advertised to sell them was back in 2008. Anyway, are there any other good ideas out...
  3. C

    Steering Gear Box Adjustment

    I drove it a while this evening. It helped but probably needs a new box. I called NAPA and they can get one for $158.00 and it USA Cardone brand. Will this be a good replacement? Secondly, how hard is it to install?
  4. C

    Steering Gear Box Adjustment

    I have had new ball joints and alll front end components installed in my 84 K20. The rag joint and steering shaft is also tight. The truck drives 80% better than before. I noticed that the gear box has quite a bit of slack from the time the steering wheel engages and the output shaft for the...
  5. C

    New Stereo Cage

    I have installed a new Pioneer Stereo into my dash along with the kit from metro. Everything has worked and looks good except for the face that the radio moves up in the cutout. I have the ears pushed down as far and as close as I can get them. I have the following parts in order from the...
  6. C

    Manual Window Hard to Roll Up

    Are you referring to the back guide? I though about getting another one of those (LMC for 19.99) and trying it.
  7. C

    Manual Window Hard to Roll Up

    My passenger side Manual Window Is Hard to Roll Up. I have had the panel on and off the door around 15 times adjusting and trying to make it work correctly. 1st of the all, when the window would go up about 3" above the trim seal, then the leading edge would work its way out and the window...
  8. C

    Door Alignment Help

    I took the door off, installed new pins and bushings, re-aligned the door, installed a new striker, and it is not perfect- but a lot better than it was!
  9. C

    Door Alignment Help

    That is what I am wondering- If they are bent. I do not see how 1/2" play is going to line up the door as shown in the 2nd picture and the gap there.
  10. C

    Door Alignment Help

    There is about 1/2" movement on the outer edge of the door. Where can these bushings be purchased? I saw in the LMC catalog where you have to purchase the entire hinge. Does the door need to have some shims under it?
  11. C

    Door Alignment Help

    I have been working on a 1984 Chevrolet K20. I have replaced all the seal in the doors and windows- including the vent windows. I have been having a little alignment problem when installing the vent window on the passenger side thus causing the actual window to have some alignment issues also...
  12. C

    Windshield Wiper Help

    It does not have a module under the steering wheel. But after further investigation, it does not have a intermittent wiper switch in the steering column. It has the correct blinker/wiper handle for intermittent but that is the reason for the "hard clicks" and limited movement back and forth...
  13. C

    Windshield Wiper Help

    Thanks for the information. That is great. One question- if the truck is not wired for the pulse module, do I need a complete wiring harness for it or can I put the module inline from the wiper switch to the wipers?
  14. C

    Windshield Wiper Help

    Hello, we have been working on a 1984 Chevrolet K20 for several months and we are now looking at the windshield wipers. They work fine and have a low and high. The wiper switch in the steeering column is for a variable speed set up and that is what we would like in the end. However right now...
  15. C

    Has anyone used gauge overlays?

    Yes- Just put them on a few weeks ago. They are hard to weave around the needle but do look good. I also painted the needles orange and added white LED lights for the background. I think it looks good. I will try to get some pics in the next few days. I am away from the truck for a few...
  16. C

    4" Lift with 35" Tires

    Thats a good idea. I was only thinking along the lines of the 37" tire because there is not many choices for a 36" tire anymore. The 35" tires appear to come in around 34-34.5.
  17. C

    4" Lift with 35" Tires

    Hello, My 1984 Chevrolet K20 currently has a 4" Lift and 35" Toyo AT tires. It has quite a bit a clearance between the fenders and the wheels. I currently has 17" Pacer rims on it- not sure of the offset. My question is can 37" tires fit under here without major problems? Or 36"...
  18. C

    New 350 Engine

    Hello, I have an 1984 Chevrolet K20 that my son and I are restoring. It is now time to work on the engine. It currently smoke pretty bad and all of the gaskets leak. My 1st intentions were to have the motor pulled by a mechanic and have it rebuilt however he called me yesterday and...
  19. C

    Add 2" to the front end of an existing Lift

    Do I need to remove one and measure the arch while not under pressure? How else can one check.
  20. C

    Truck is walking while driving

    I see an adjustment bolt on the top side of the gear box. Is this advisable to do?
  21. C

    Add 2" to the front end of an existing Lift

    One more
  22. C

    Add 2" to the front end of an existing Lift

    Another one
  23. C

    Add 2" to the front end of an existing Lift

    Hope this will work
  24. C

    Installing a new Stereo

    While I have the dash and everything out, I would like to install a new stereo. The truck has not had one in quite a while. I have replaced the dash speakers with the ones from LMC. My question is: Is there a certain type, brand, or size radio that it needs to be to fit the factory bezel...
  25. C

    Vent Window Inside Seals

    I have ordered the 1 piece inside seal from LMC for my vent windows. I started taking out the existing seal yesterday and noticed that it is riveted into plate and also that the window is riveted into place. Does anyone have any advice on the easiest way to install the 1 piece seal and do I...

Latest posts

Forum statistics

Threads
45,586
Posts
986,950
Members
38,675
Latest member
Shak379
Top