Search results

  1. C

    Holley sniper cable routing

    TCI 376705 700R4 & 2004R Bracket https://a.co/d/5s58Njk Here’s the bracket I used. Worked great. Copy n paste that link
  2. C

    Disappearing coolant

    That was my guess too. Would’ve liked to see a compression test with a cylinder way lower than the rest to indicate that. And I forgot to mention that the cooling system will hold pressure for a week or more, without being driven or even started.
  3. C

    Disappearing coolant

    So since I’ve owned this rig I’ve had a slow coolant disappearing act going on. ZERO water in the oil. No visible external leaks. No smell of coolant in the exhaust whatsoever. Used the ole girl harder this weekend than usual, moving from one cabin to another. “Used” about 3/4 of a gallon...
  4. C

    Shade-Tree Tranny Removal

    Prybar:emotions33:
  5. C

    Shade-Tree Tranny Removal

    Lol Been there done that. Suicide Jenga
  6. C

    Axle housing diameter?? Broken shock mount

    Just came in from rust checking my 84K10 for the winter. Once I got to the back of the rig, I noticed that the driver side lower shock mount was broken. Probably happened yesterday when I drove it home from the cabin with the quad in the back. Anyhow, are these 10 bolt housings 3” in...
  7. C

    Steel Wheels K20

    I second Wheel Vintiques I used them for custom 15x10’s on my 68 Dart. They did have the bumps for the dog dish hub caps as well. See poor pic below.
  8. C

    Custom Tail Lights or Not

    I’d use the Vandura lights if they’ll fit. Not a fan of the step side light setups. Codfish
  9. C

    Show your daily driver

    Only vehicle I own.
  10. C

    Flashing head lights

    I had the same issue, even after a new switch install. Ended up buying a couple of relays and doing the relay upgrade. Lights noticeably brighter and no more flickering. codfish
  11. C

    What have you done to your square lately??

    Finally painted/finished my topper and installed it. Every truck I’ve ever owned had a cap, and frankly it felt naked without one. Lucky to find this period correct one. This is my daily driver so it will keep my stuff rain and snow free when we go to the cabin every weekend. Codfish
  12. C

    Got Stickers?

  13. C

    Suggestions on primer for my topper

    Last pic. Windows tinted and racks installed. All done finally. Codfish
  14. C

    Quiet muffler recommendations

    Went with the Walker Quiet Flows. Not a huge difference at idle, but much better driving around. Those videos were taken on different days, with the Flowmaster video on a warm engine, and the Walkers on a cold start. I’ll probably do another video on a warm engine with the new mufflers for a...
  15. C

    Quiet muffler recommendations

  16. C

    Anyone have a LS swapped 3+3?

    Check out Vice Grip Garage if you havent already on YouTube He did that swap on the same truck. Just search Cat Crew Cab I think it’s called.Great show. I think a few episodes cover the swap. Codfish
  17. C

    Suggestions on primer for my topper

    Thanks. $20 HVLP gun did the trick lol. I have a couple racks made for the top for carrying my canoe and extension ladder on. Put that on tomorrow. Just happy the colour turned out good.
  18. C

    Suggestions on primer for my topper

    Just gotta get the side glass back in and wait for some window tint to show up. Happy with my first time results.
  19. C

    Suggestions on primer for my topper

  20. C

    Suggestions on primer for my topper

  21. C

    Fan clutch resistance question

    Yeah I’ve already ditched the Holley temp sender for an aftermarket sender.
  22. C

    Fan clutch resistance question

    Still “stiffish” after 5 mins of running. Well after going to town twice for a thermostat (wrong one in the first package-160 instead of 195), I have more questions. Maybe I’ll start a new thread. After installing a new 195° thermostat and cleaning up the stock sending unit’s wire connection...
  23. C

    Fan clutch resistance question

    Good point I’ll try that
  24. C

    Fan clutch resistance question

    How much resistance should a cold fan clutch have when spinning it by hand? I can move it. But it certainly won’t keep spinning when I stop moving it. It’s stiff but it moves. I’m trying to figure out why it never gets above 130-140°. Gonna get another thermostat today and throw it in...
  25. C

    What is this?

    Thanks guys I guess mine does work. Now. Just found a broken wire on the firewall that’s part of that system and fixed it. Intermittent wipers are working again!! Thanks again

Latest posts

Forum statistics

Threads
45,582
Posts
986,850
Members
38,672
Latest member
Knightewulf
Top