C
codfish
Latest activity Postings About
-
-
Ccodfish replied to the thread Fuel sending unit help.I ended up getting a new sending unit that I could drill a 9/16” hole for the sniper return line. I only have the single tank, and I...
-
Ccodfish replied to the thread Holley sniper install questions.Temp sensor now in the head. I did put the stock sensor in the thermostat housing though for the stock gauge. Not too worried about the...
-
Ccodfish replied to the thread Holley sniper install questions.Finally got through to the tech line at Holley He said any voltage drop below 10 is not advisable. He said it may work, but could...
-
Ccodfish replied to the thread Holley sniper install questions.Thanks I’m waiting for the Holley tech line to open. I’ll ask them as well. I’ll report back with what they say. Codfish
-
Ccodfish replied to the thread Holley sniper install questions.Just getting into the wiring finally for the sniper. Pink wire question. I know it needs power while in run and while cranking. That’s...
-
CInstalling a Holley sniper on my 84 k10. Single drivers side tank. Dropped the tank to modify the sending unit for the return line, and...
-
-
Ccodfish replied to the thread Help with block id.Well I “think” the casting number reads 14016379, late 70’s 350 with 2or 4 bolt mains. Just wanted to know exactly what it is. May...
-
Ccodfish replied to the thread Help with block id.Found these numbers on a tag riveted to the block Still trying to get the others
-
-
Ccodfish replied to the thread Help with block id.Any idea if the year can be determined from this number? That’s what I really need to know. Gonna try to get the numbers from the back...
-
Ccodfish replied to the thread Help with block id.Thanks for the reply Only those numbers. And the pad is a different Shape than your pic. More square than rectangular. Maybe 1 1/2”...
-
CTrying to find the year of my small block. Just for parts ordering and what not. No other reason. I looked at the “lime book”...
-
Ccodfish replied to the thread Small block starter question.Thanks for the help. Same starter is in (the small one due to availability and header clearance). Bolts to be checked. Cheers Codfish
-
CSo my starter quit today. Acted up every now and then, finally crapped out today. Called parts stores and found one starter in town for...
-
Ccodfish replied to the thread 1987 V20 headlights.Where I live I had trouble finding replacement headlights for my 84, with quad lamps. When I did they were $20 a pop. I’m cheap. I...
-
Ccodfish replied to the thread The 383 is finally going in!.All good advice Remove the distributor Pre hang the headers An engine leveler helps in many cases, but looks like you should be able...
-
-
Loading…
-
Loading…
Latest posts
-
Goodwrench crate engine smoking from passenger side exhaust- Latest: iamtherealJayy
-
-
-
