Search results

  1. oneluckypops

    Thinking of swapping to ls

    you can still have cruise control with a DBC.
  2. oneluckypops

    TBI 350 to Vortec and Roller Cam

    vortec distributors are PLASTIC, and the crab cap is a real PAIN IN THE ASS!!!
  3. oneluckypops

    Shorter steering column?

    in a nutshell, I presume you relocated the mounting bracket on the column and shortened the shaft under the hood?
  4. oneluckypops

    What t case is this

    That is a NP241C transfer case (Driver side drop). Notice the wires hooked to it, they are for a VSS. That transfercase is used for 88-98 chevy trucks. It will NOT work in these old square bodies.
  5. oneluckypops

    Direct Horn Test

    yup that is correct, the single wire comes from the horn switch and is a +12v wire, the horn is a self grounding unit, Meaning the mounting bracket bolts to the core support. Which supplies the ground to complete the circuit Just touch the bracket to a negative post and a fused jumper wire to...
  6. oneluckypops

    Direct Horn Test

    Ground the horn, then hook a jumper from the battery to the terminal, If you about shit yourself its good.
  7. oneluckypops

    old sullair 185 air compressor

    Cool find, I see your still on the site also, hows the project coming along? Haven't had a chance to look at all of them yet.
  8. oneluckypops

    Upgraded to a later model alternator and need help.

    any chance of getting some pictures?
  9. oneluckypops

    What's this thing in my rim?

    what he said
  10. oneluckypops

    87 Scottsdale 4X4 5.3 LSX swap

    First let me say that is a very nice looking truck, especially like the pic of it sitting next to the new ones. lol I read thru all the comments and the entire post and didn't seem to find the answer. I have done a "few" of these swaps before lol and kind of curious as to what your truck acts...
  11. oneluckypops

    Ford Guy new to Chevys

    +1 2.25" would be best and yes you will loose the back pressure with 3". You MAY get away with 2.5" but that Kind of depends on the motor you have. I still agree with foamypirate though, 2.25" would be best, and IMO glasspacks suck, Turbo mufflers are my favorite.
  12. oneluckypops

    700r4 output seal

    Everything above is really good advise. But unless I missed it no one really touched on a couple different things. A properly lubricated seal does not go bad for no reason, worn out bushings and or bearings cause them to fail. Be sure to check for excessive slop in the output shaft, very...
  13. oneluckypops

    Need help with 4l80E swap!!!

    Yea I do indeed think its more work then its worth, especially after finding out he already has a TH400. Why not just swap the engines? or is there something else wrong twith the 91 that were not aware of?
  14. oneluckypops

    Need help with 4l80E swap!!!

    Ok hold on let me try to help you out here. Your wanting to swap a 4l80e in to an 89 suburban correct? I am not sure what Transmission you have in the burb as of right now, but most likely either a TH350, or a 700R4. It doesn't really make a lot of differences neither of them are...
  15. oneluckypops

    Dad has cancer-help me fix his AC please

    First let me say sorry to hear about your dad. I hope he has a speedy recovery. I am sure he would appreciate it very much so to get it back with working A/C again. I would recommend changing the receiver dryer, orphus tube, flush the evaporator out with A/C flush. You could try flushing the...
  16. oneluckypops

    A/C Help

    The suggestions that you have already received are very good assumptions and more then likely spot on. But the FIRST thing you should consider doing is hooking up to a set of gauges and check to see what your pressures are reading. Next you need to actually check the airflow thru the...
  17. oneluckypops

    A/c compressor wiring

    You are partially correct. The switch on the receiver dryer is where the compressor receives its signal. But it is NOT a high pressure switch, instead it is the low pressure switch (aka cycling switch). I wouldn't use the word "jumper" when your dealing with A/C. If the pigtail on the cycling...
  18. oneluckypops

    Burb electrical gremlins

    kinda sounds like you have an ignition switch malfunctioning.
  19. oneluckypops

    Help in houston please

    Thanks it looks like I am going to have to trailer it and use a uhaul to move
  20. oneluckypops

    Help in houston please

    I am needing a 6 lug rear end for a 88-98 chevy K1500 with 3.73's ASAP!!!! Is there anyone in or around Houston Tx. that has one? Don't care if its a 10 bolt or a 14 bolt.
  21. oneluckypops

    most reputable trans builder?

    providing us a location as to where your at might get you some better results
  22. oneluckypops

    RetroC10Sport isn't just the Squarebody Librarian Anymore.

    I am not sure if he ever got the hammer temporarily or if he's totally hammered.
  23. oneluckypops

    RetroC10Sport isn't just the Squarebody Librarian Anymore.

    lmao point taken!!!!
  24. oneluckypops

    RetroC10Sport isn't just the Squarebody Librarian Anymore.

    oh god just don't tell dave that!!!!!
  25. oneluckypops

    8.1L engine 4L80E trans 4.10 vs 3.73

    +1 3.73's are to high for a 4L80E. IMO 4.10's are bare minimum. 4.56's work very well for a small block, but given your running an 8.1L I would stay with a 4.10 ratio....

Latest posts

Forum statistics

Threads
45,575
Posts
986,739
Members
38,666
Latest member
alwaysbroken
Top